www.ratbike.org message board (Page 8 )

www.ratbike.org message board

Not logged in | Login | Create Account

Search Post now!

Steering bearing super duper win..... - ThefastestMelv on Apr 18, 2013, 9:23 PM

Snowdrops - scott on Apr 18, 2013, 11:04 PM

any way to shorten a side stand without a welder ? - s.r on Apr 18, 2013, 8:21 PM

Bend it? Not sure, might snap i suppose. You could always make one and... - Jim on Apr 18, 2013, 8:39 PM

Find a local bike breakers and......... - ThefastestMelv on Apr 18, 2013, 9:18 PM

sadly no breakers were i am. health and safety gone mad - s.r on Apr 18, 2013, 10:14 PM

pack a shovel or some wood - Poodle Head Mikey on Apr 19, 2013, 1:28 PM

just cut it shorter? - ratbike.org on Apr 18, 2013, 9:26 PM

the plate on the bottom* - s.r on Apr 18, 2013, 10:13 PM

Just saw it off and give her a bit of plate to chuck under it - Nate on Apr 18, 2013, 10:32 PM

can't see whats wrong with just chopping it - Dan on Apr 18, 2013, 11:05 PM

Summer + shitty council tarmac = FAIL* - Jim on Apr 19, 2013, 7:05 AM

file the pivot to be slimmer so it leans more on the stock stand. - big chris on Apr 19, 2013, 12:16 AM

fix your welder, its easier that living without one, and often parts are v cheap. - big chris on Apr 19, 2013, 5:41 AM

Cut it to the length you need then. - Mouse on Apr 19, 2013, 11:44 AM

Pack a small shovel or some wood - Poodle Head Mikey on Apr 19, 2013, 1:19 PM

so i did the valve clearences yesterday - Jim on Apr 18, 2013, 7:19 PM

top tip for getting them nob on - Dan on Apr 18, 2013, 11:02 PM

yeah, i always check after doing up the locknut - Jim on Apr 19, 2013, 7:08 AM

its called a go/nogo gauge - rolandrat on Apr 19, 2013, 9:14 AM

reminds me of testing rifle barrels for wear* - Jim on Apr 19, 2013, 10:46 AM

that is one hell of a big tolerance - Poodle Head Mikey on Apr 19, 2013, 1:27 PM

pmsl - england is no longer imperial! - rolandrat on Apr 19, 2013, 1:28 PM

Should have kept Thatcher - she would have put a stop to that nonsense - Poodle Head Mikey on Apr 19, 2013, 1:40 PM

how about half litre? ;p - rolandrat on Apr 19, 2013, 2:15 PM

stop short changing us - ratbike.org on Apr 19, 2013, 3:33 PM

Metric is literally the ONE good thing to come from france - Jim on Apr 19, 2013, 2:22 PM

over here ifyou want to import or produce anything with imperial measurements on it...... - spotty on Apr 20, 2013, 3:31 AM

what about things that are measured in inches, even in France... - ratbike.org on Apr 20, 2013, 11:41 AM

you're right, i forgot abouit them......... - spotty on Apr 20, 2013, 1:34 PM

is it like here? - rolandrat on Apr 20, 2013, 10:21 PM

nah, pretty much everything is in kilo/litre etc...... - spotty on Apr 21, 2013, 2:25 AM

I went through a phase of buying things and specifying size / amount by..... - Mouse on Apr 21, 2013, 7:02 PM

madness!* - Jim on Apr 20, 2013, 3:01 PM

I checked my valve clearances earlier - scott on Apr 19, 2013, 3:01 PM

no other tools than your fingers? - ratbike.org on Apr 19, 2013, 3:38 PM

Smugalow* - Jim on Apr 19, 2013, 4:13 PM

Fingers? - Mouse on Apr 19, 2013, 11:33 PM

so the 6/12 is road legal :D - VJ on Apr 18, 2013, 7:14 PM

Flatsides* - Jim on Apr 18, 2013, 7:20 PM

any idea what cams are in that engine? - ratbike.org on Apr 18, 2013, 7:32 PM

no idea - VJ on Apr 18, 2013, 8:07 PM

which is weird because my slabby has all 3 in abundance... - Jim on Apr 18, 2013, 8:40 PM

Cool Nice work duder..... - ThefastestMelv on Apr 18, 2013, 9:15 PM

Confirmed, nothing below 3g... - Jim on Apr 18, 2013, 9:36 PM

epic, i need a rev gauge - VJ on Apr 18, 2013, 9:58 PM

i may have a spare set of slabby clocks somewhere? - Jim on Apr 19, 2013, 10:50 AM

aye im deffo interested in the clockset, - vj on Apr 19, 2013, 10:58 AM

Yours then. Need to get that shit out the Mother in law's shed anyway* - Jim on Apr 19, 2013, 4:15 PM

nice one - VJ on Apr 19, 2013, 4:34 PM

you need it in a rush? if not there's r&s next month* - Jim on Apr 19, 2013, 7:01 PM

wouldnt mind it before, it'd make diagnosing shit a bit easier - vj on Apr 19, 2013, 7:45 PM

cool, i'll take it into the post office monday* - Jim on Apr 19, 2013, 8:03 PM

Anywhere doing real cheap bicycle speedo's at the minute?* - Nate on Apr 18, 2013, 4:36 PM

Lidl had some in last week down here. - Issy on Apr 18, 2013, 4:50 PM

Cool, i like the Lidl ones :)* - Nate on Apr 18, 2013, 10:28 PM

the bigger Tesco's have cheap ass bicycle stuff - ratbike.org on Apr 18, 2013, 5:13 PM

WHAT ABOUT................ - ThefastestMelv on Apr 18, 2013, 9:16 PM

Yeah I would have if I had enough time left. - Nate on Apr 18, 2013, 10:34 PM

you can put new batterys in them you know - Dan on Apr 18, 2013, 11:12 PM

avoid expensive trailtech ones, not that you'd consider them anyway - big chris on Apr 19, 2013, 12:10 AM

I bought a truck - Poodle Head Mikey on Apr 18, 2013, 3:10 PM

what happened to your paddy wagon - ratbike.org on Apr 18, 2013, 3:40 PM

I liked the paddy wagon / SWAT Truck - Poodle Head Mikey on Apr 18, 2013, 4:47 PM

I wouldn't mind a pic or two... - der_nanno on Apr 19, 2013, 6:42 AM

send me an e-mail - Poodle Head Mikey on Apr 19, 2013, 1:11 PM

latest forecast is that the ride there & back will be dry - rolandrat on Apr 18, 2013, 2:48 PM

all booked for germany - Dan on Apr 18, 2013, 12:18 PM

its best avoided * - rolandrat on Apr 18, 2013, 12:43 PM

I like the Antwerp route better - ratbike.org on Apr 18, 2013, 12:52 PM

seems to go through gent - Dan on Apr 18, 2013, 5:57 PM

I'm torn between trying to get there for Thu night.... - ratbike.org on Apr 18, 2013, 6:30 PM

doing the senic route on the way back - Dan on Apr 18, 2013, 6:37 PM

you do realize how far it is? - ratbike.org on Apr 18, 2013, 6:43 PM

yeah leaving afternoon of the day - Dan on Apr 18, 2013, 11:08 PM

I'll be about 18 hours ahead of you then - rolandrat on Apr 18, 2013, 9:14 PM

you still looking at stopping near - Dan on Apr 19, 2013, 3:00 PM

I thought they were planning to leave K�the's place Thursday morning - ratbike.org on Apr 19, 2013, 3:44 PM

I'm looking at stopping 2-3 hours away - rolandrat on Apr 20, 2013, 8:32 PM

what better way to arrive at the german rally site than this...... - spotty on Apr 18, 2013, 11:32 AM

What is this I don't even? - scott on Apr 18, 2013, 3:08 PM

and nitrous, don't forget the nitrous! * - rolandrat on Apr 18, 2013, 4:09 PM

how did they attach guns to a balsa wood frame? - big chris on Apr 19, 2013, 12:13 AM

this pub to camp at near dover rose & crown..... - Dan on Apr 17, 2013, 10:30 PM

Re: this pub to camp at near dover rose & crown..... - Mouse on Apr 17, 2013, 10:54 PM

cheers dude - Dan on Apr 17, 2013, 11:15 PM

arrrrr matey, what fine vessel will ya be setting sail on? - ratbike.org on Apr 18, 2013, 8:51 AM

It be in the lap of the Gods arrrr - Dan on Apr 18, 2013, 10:34 AM

I think I'm on the 7am one - ratbike.org on Apr 18, 2013, 11:45 AM

booking now - Dan on Apr 18, 2013, 12:00 PM

Fucker - Nate on Apr 18, 2013, 3:29 PM

will aluminum beer can work for and exhaust flange gasket? - Poodle Head Mikey on Apr 17, 2013, 8:26 PM

Sandwich... - Lurch on Apr 17, 2013, 8:37 PM

I'd use the copper - ratbike.org on Apr 17, 2013, 8:38 PM

How about sheet lead? I just found a roll of that. - Poodle Head Mikey on Apr 17, 2013, 9:06 PM

Creep! - Mouse on Apr 17, 2013, 9:57 PM

He said flange..snigger snigger.* - Robbo on Apr 17, 2013, 9:07 PM

just gasket paper - Dan on Apr 17, 2013, 10:35 PM

thickish copper is what I'd go for - rolandrat on Apr 18, 2013, 8:55 AM

thickish copper?...... - voodoo on Apr 18, 2013, 3:46 PM

round here - rolandrat on Apr 18, 2013, 4:10 PM

better a thick copper than.......... - ratbike.org on Apr 18, 2013, 5:15 PM

thick gasket paper - no GB no more on Apr 19, 2013, 8:13 AM

hells angels documentary 1969 and a bloke called hitler - gary on Apr 17, 2013, 8:11 PM

REX...remember me telling you a while back about some massive single cylinder bike. Well.. - Robbo on Apr 17, 2013, 4:52 PM

I want that! Everything about that is to my liking. - rex on Apr 17, 2013, 5:38 PM

I'll have to fight you for it! - Graham on Apr 17, 2013, 7:13 PM

Careful Rex! - Poodle Head Mikey on Apr 17, 2013, 8:37 PM

Just spotted some more photes of it. - Mouse on Apr 17, 2013, 9:54 PM

Oooooo..the window over the bevel gears.* - Robbo on Apr 17, 2013, 10:07 PM

for those who prefer twins, there's an alternative..... - voodoo on Apr 18, 2013, 10:28 AM

Foreigners. - rex on Apr 19, 2013, 4:08 PM

what do you use as a 3rd hand when soldering? - big chris on Apr 17, 2013, 3:17 PM

I bought one of those 3rd hand things years ago - ratbike.org on Apr 17, 2013, 3:23 PM

nothing - Graham on Apr 17, 2013, 7:11 PM

that sounds too hard, I'll continue my quest for a suitable tool - big chris on Apr 19, 2013, 8:40 AM

i'm pretty sure bunnings sell those 3rd hand thingys..... - spotty on Apr 19, 2013, 10:03 AM

problem is they're metal, solder sticks to them - big chris on Apr 19, 2013, 12:51 PM

you're not supossed to clamp THAT close to the solder joint - ratbike.org on Apr 19, 2013, 12:55 PM

I know, but when one piece of wire is attached to the bike.... - big chris on Apr 19, 2013, 1:24 PM

yes there is - rolandrat on Apr 19, 2013, 2:16 PM

non conductive clip you say.... - Captain Obvious on Apr 19, 2013, 4:09 PM

FARKIN' GENIUS!! praise be to Allah! - big chris on Apr 19, 2013, 11:51 PM

i'm a dumbarse........ - spotty on Apr 20, 2013, 10:32 AM

ADAM'S NOW A DAD!! - Nate on Apr 17, 2013, 9:47 AM

woot! - rolandrat on Apr 17, 2013, 9:55 AM

awsome :-)......... - ant n nikki on Apr 17, 2013, 9:57 AM

Hooray! Congrats to them all. - Hoon on Apr 17, 2013, 10:15 AM

Does his moby no. still end in 337? I want to send a congrats to them both. * - Hoon on Apr 17, 2013, 10:26 AM

Yep, sure does* - Nate on Apr 17, 2013, 10:40 AM

Tar. * - Hoon on Apr 17, 2013, 11:17 AM

Ah, that explains it. - rex on Apr 17, 2013, 11:15 AM

Careful! He's watching you.... - Jim on Apr 17, 2013, 1:37 PM

Congrats to both x* - redfog on Apr 17, 2013, 2:52 PM

4.2 kilos, eh? - ratbike.org on Apr 17, 2013, 3:02 PM

Who wanted to know what route me'n Fez are taking? - Nate on Apr 17, 2013, 9:15 AM

Wasn't me, I'm a nervous gibbering wreck just thiking about it. - Hoon on Apr 17, 2013, 9:18 AM

Yeah it went through the mot yesterday woohoo! , he's fitted a whole new hub and wheel - Nate on Apr 17, 2013, 9:29 AM

mmh. I'd forgotten about that - rolandrat on Apr 17, 2013, 9:33 AM

Hey Rolly, I might be nipping to see you today/tomorrow. - Nate on Apr 17, 2013, 9:36 AM

yeah no probs * - rolandrat on Apr 17, 2013, 9:55 AM

Good luck to you sir. * - Hoon on Apr 17, 2013, 10:17 AM

are the rumours true... - ratbike.org on Apr 17, 2013, 11:47 AM

It might be me at this rate, just had to bring my bike home in a van* - Nate on Apr 17, 2013, 8:40 PM

hmmm you can....... - ant on Apr 17, 2013, 9:19 PM

Cheeky f#cker - Nate on Apr 18, 2013, 7:40 AM

don't want to know the route, but what day are you leaving... - ratbike.org on Apr 17, 2013, 10:06 AM

Leaving on sunday, eta wednesday, you want Kats address?* - Nate on Apr 17, 2013, 10:40 AM

not leaving til Thursday - ratbike.org on Apr 17, 2013, 11:34 AM

9AM am Monday ring council about excessive and dangerous potholes in the road... - Mouse on Apr 16, 2013, 11:09 PM

EPIC WIN! - der_nanno on Apr 16, 2013, 11:51 PM

Re: 9AM am Monday ring council about excessive and dangerous potholes in the road... - Graham on Apr 17, 2013, 8:16 AM

Sounds like a plan. - Mouse on Apr 17, 2013, 9:18 AM

I wonder what would happen if... - rex on Apr 17, 2013, 11:13 AM

is it a bird?? is it a plane?? no it's PHANTOM POTHOLE FILLER MAN - ratbike.org on Apr 17, 2013, 11:36 AM

can I wear my pants on the outside now then? - Graham on Apr 17, 2013, 7:14 PM

I thought you did anyway - rolandrat on Apr 18, 2013, 10:09 PM

It works the other way around, - Mouse on Apr 17, 2013, 11:50 AM

Depends what you fill them in with - scott on Apr 17, 2013, 4:53 PM

That should be encouraged! - Mouse on Apr 17, 2013, 6:05 PM

They would probably repave the entire road if You filled them - Poodle Head Mikey on Apr 17, 2013, 9:00 PM

its true - rolandrat on Apr 18, 2013, 9:02 AM

Tomorrow i do the valve clearences on slabrat... - Jim on Apr 16, 2013, 6:56 PM

Cup of tea and a steady hand. - Mouse on Apr 16, 2013, 8:02 PM

anyone want a CB750 F1? - Dan on Apr 16, 2013, 5:48 PM

it'll be full of FAIL - ratbike.org on Apr 16, 2013, 5:51 PM

Tis my brother in law's. Free listings, even a rat section! http://www.bike-shack.com/ - Jim on Apr 16, 2013, 6:45 PM

remember this, - s.r on Apr 16, 2013, 5:12 PM

Cool! - Mouse on Apr 16, 2013, 8:00 PM

why is it, that everytime I buy a bike I really like, it turns out to be a pile of FAIL? - ratbike.org on Apr 16, 2013, 5:01 PM

buy somthin you don`t like* - ant the me on Apr 16, 2013, 5:05 PM

I don't like the Honda that much... - ratbike.org on Apr 16, 2013, 5:16 PM

well, your talkin to the right person for one of them* - ant the me on Apr 16, 2013, 5:45 PM

You know why that is? - Nate on Apr 16, 2013, 5:10 PM

luckily, you're the only person I know... - ratbike.org on Apr 16, 2013, 7:58 PM

that the suzuki? - U.T on Apr 17, 2013, 6:21 PM

sure is - ratbike.org on Apr 17, 2013, 8:08 PM

What's wrong with it?.... - Robbo on Apr 17, 2013, 8:20 PM

the usual - ratbike.org on Apr 17, 2013, 8:26 PM

yes you do. - U.T on Apr 17, 2013, 8:25 PM

PASSED THE MOT!!! - Nate on Apr 16, 2013, 4:32 PM

in what? - ant the me on Apr 16, 2013, 4:40 PM

On ze Goblin, my MOT bloke's f#cking ace* - Nate on Apr 16, 2013, 4:44 PM

Only downside is the front tyre and sprocket hub are fucked :(* - Nate on Apr 16, 2013, 4:46 PM

Rex knows how to mend bearings in a sprocket carrier! - Mouse on Apr 16, 2013, 7:56 PM

I'll get him to order me some nice Made in england bearings* - Nate on Apr 16, 2013, 8:39 PM

so, i guess you......... - ant the me on Apr 16, 2013, 4:47 PM

nice one - rolandrat on Apr 16, 2013, 4:57 PM

I don't care anymore - Nate on Apr 16, 2013, 5:08 PM

sent you a text* - ant the me on Apr 16, 2013, 5:13 PM

I'm sending you one* - Nate on Apr 16, 2013, 5:28 PM

me or roland?* - ant the me on Apr 16, 2013, 5:42 PM

You, did you enjoy it?* - Nate on Apr 16, 2013, 6:31 PM

i do beleve i replied......... - ant the me on Apr 16, 2013, 6:40 PM

Don't be silly... - Jim on Apr 16, 2013, 6:48 PM

aahhhhh........... - ant the me on Apr 16, 2013, 6:49 PM

Oh the ongoing pain! - rex on Apr 16, 2013, 12:19 PM

do you not know anyone in americashire - rolandrat on Apr 16, 2013, 12:41 PM

What happened to the trade only guy that stocks them in the UK - Mouse on Apr 16, 2013, 12:56 PM

This is Rex Mundy Possum we are dealing with here... - Robbo on Apr 16, 2013, 2:17 PM

Trade only. - rex on Apr 16, 2013, 4:52 PM

want to let me know who exactly it is - rolandrat on Apr 16, 2013, 4:54 PM

FFS Rex phone or go in yourself - Dan on Apr 16, 2013, 5:41 PM

I agree - scott on Apr 16, 2013, 6:12 PM

But why? - rex on Apr 16, 2013, 7:20 PM

i go back to my last statement......... - ant the me on Apr 16, 2013, 7:22 PM

but how so you know that it's different outise of UK? - ratbike.org on Apr 16, 2013, 7:42 PM

Were I in Bumfuck... - rex on Apr 16, 2013, 7:47 PM

Do you speak to people on the phone like this when you try and enquire about a bearing.?* - Mouse on Apr 16, 2013, 7:53 PM

Of course not! - rex on Apr 16, 2013, 8:31 PM

I could get that bearing. But YOU never will - Dan on Apr 17, 2013, 12:06 AM

Already got one. - rex on Apr 17, 2013, 11:19 AM

alternate point of view - rolandrat on Apr 17, 2013, 12:00 PM

I agree. - rex on Apr 17, 2013, 1:59 PM

because noone questions it - rolandrat on Apr 17, 2013, 2:24 PM

try the belfast way........... - s.r on Apr 16, 2013, 2:37 PM

see, i use revolution bearings - U.T on Apr 17, 2013, 6:29 PM

tidy sr125 up for grabs.... - ant on Apr 16, 2013, 11:24 AM

Wonga? - Mouse on Apr 16, 2013, 8:00 PM

ermm........ - ant the sleepy on Apr 16, 2013, 9:07 PM

so I think I'm getting there and will make it to germany - Dan on Apr 16, 2013, 10:58 AM

Sounding promising. Pyramid shaped tyre? well it is the CamelWing afterall. - Hoon on Apr 17, 2013, 9:15 AM

anybody have a remote reservoir front master cylinder? - ratbike.org on Apr 16, 2013, 10:22 AM

Only the correct OEM parts will do!* - Nate on Apr 16, 2013, 10:37 AM

OK, anybody have part number 59600-32C01 or 4SV-W2587-10-00 ? * - ratbike.org on Apr 16, 2013, 11:59 AM

There's a whole bunch of that sort of thing on ebay - Mouse on Apr 16, 2013, 12:22 PM

the people on ebay all want real money, what's the deal with that? - ratbike.org on Apr 16, 2013, 12:49 PM

I humbly apologise. - Mouse on Apr 16, 2013, 12:55 PM

with some tupperware and a straw!* - Jim on Apr 16, 2013, 6:52 PM

no longer a problem - ratbike.org on Apr 16, 2013, 7:00 PM

You may jest! - Mouse on Apr 16, 2013, 7:59 PM

They do that on race bikes. - scott on Apr 17, 2013, 5:43 PM

Shitting hell, just had a insurance quote from ebike - Nate on Apr 16, 2013, 9:31 AM

'kin hell dude - rolandrat on Apr 16, 2013, 9:36 AM

Who are you with?* - Nate on Apr 16, 2013, 9:44 AM

adrian flux * - rolandrat on Apr 16, 2013, 9:47 AM

That's not far off what the slabby costs me TPFT!!* - Jim on Apr 16, 2013, 11:42 AM

�780?* - Nate on Apr 16, 2013, 11:48 AM

Costs me �150 a year. Because it's old and i have 5yr no claims* - Jim on Apr 17, 2013, 10:19 AM

If someone was a terrible dispicable horrible individual - Nate on Apr 16, 2013, 9:43 AM

it wouldn't be taxed - rolandrat on Apr 16, 2013, 9:47 AM

i can do that...........but - ant the me on Apr 16, 2013, 1:57 PM

and my insurance is...... - ant the me on Apr 16, 2013, 1:58 PM

well i'm sorted then* - Jim on Apr 17, 2013, 2:03 PM

Also wft is with comparison sites that state they can give quotes for modified bikes - Nate on Apr 16, 2013, 9:58 AM

they're insurance companies - rolandrat on Apr 16, 2013, 9:59 AM

Sure. - rex on Apr 16, 2013, 10:13 AM

phone bikesure - VJ on Apr 16, 2013, 10:18 AM

Well they got it down to �130 TPF&T - Nate on Apr 16, 2013, 11:08 AM

�130 Sounds OK to me. - Mouse on Apr 16, 2013, 12:24 PM

there you are, should have left it unmodified - ratbike.org on Apr 16, 2013, 10:24 AM

Standard bikes? - rex on Apr 16, 2013, 10:32 AM

*ahem* - rolandrat on Apr 16, 2013, 10:34 AM

Perfect to within a +/-10mm tolerance :P* - Nate on Apr 16, 2013, 10:36 AM

not even that good - rolandrat on Apr 16, 2013, 10:40 AM

thats more than I pay fully comp - Dan on Apr 16, 2013, 10:36 AM

Is Adrian flux now BikeSure? as I seem to keep being redirected* - Nate on Apr 16, 2013, 10:40 AM

yeah, same people, different names * - rolandrat on Apr 16, 2013, 10:41 AM

F#ck me, rang carole nash where I spoke to Aseem(sp?) - Nate on Apr 16, 2013, 12:18 PM

you sure you rang the correct Carol Nash? - ratbike.org on Apr 16, 2013, 12:51 PM

dare I ask how you know that? * - rolandrat on Apr 16, 2013, 1:02 PM

the "wrong" one used to come up top in Google - ratbike.org on Apr 16, 2013, 2:18 PM

I R being famous on the radio again tonight (my time)...... - spotty on Apr 16, 2013, 8:55 AM

I am not sure you could...... - Goose on Apr 16, 2013, 10:15 AM

How did we miss this competition? - Mouse on Apr 15, 2013, 11:12 PM

ah, new zealand...... - spotty on Apr 17, 2013, 11:18 AM

Is currently swearing and sweating at a pissy little pitbike tyre. - Hoon on Apr 15, 2013, 9:59 PM

Has just owned one tyre and got the bugger on. - Hoon on Apr 15, 2013, 10:19 PM

I find that wasing up liquid works wonders on sticky tyres. * - Mouse on Apr 15, 2013, 10:23 PM

Ta, been using that. * - Hoon on Apr 15, 2013, 10:27 PM

Is now a master of tyre changing. - Hoon on Apr 15, 2013, 10:44 PM

Has just finished an all-nighter and got the pitbike close to being ready to run. - Hoon on Apr 16, 2013, 5:56 AM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>