Joe,

there are alot of parts out there right now for cockers, what would you recommend for internals?

Pretty much anything will work and you won't see hardly any difference between the standard and eclip$e setup.
I kinda like the STO style internals with stainless valve body.
These run between 300 and 400 PSI and work forever.....and that pressure range seems to yield the best SPCI (Shots Per Cubic Inch).
The Evil valve is OK and runs around 200 to 300 PSI but are prone to leak as the cupseal and valve stem are one piece delrin.

Link to stanless STO style:
http://cgi.ebay.com/NEW-Autococker-Orracle-Valve-Kit-w-o-ring-cocking-rod_W0QQitemZ160222066489QQcmdZViewItemQQptZLH_DefaultDomain_0?_trksid=p3286.m20.l1116
I have plenty of hammers to complete this set and will trade a hammer for the cocking rod as you won't need the cocking rod with a half-block....




Cheers,
Joe Petty
We have heard that a million monkeys pounding on a million keyboards would eventually replicate the works of Shakespeare. Now thanks to the Internet, we know this is not true.

Im having a hard time finding a decent frame for this thing, do you happen to have one? or do you happen to know someplace that actually caries them?

Here you go:

http://www.cartermachine.com/store/parts/dyesingleswingframe.html>



I am also now a CCM dealer...











Cheers,

Joe Petty

We have heard that a million monkeys pounding on a million keyboards would eventually replicate the works of Shakespeare. Now thanks to Internet forums, we know this is not true.

AWSOME!

i think i should be able to get the parts in by this weekend, i hope. if not i probably will be there on sat anyways.

so, the parts arn't going to be here till mid next week due to idiots that dont know how to ship...

Greetings,
I know the feeling.....
The tap for the front to rethread for the mini kit along with all the tooling I ordered for my lathe didn't make it either.
The order from Wevo hasn't showed up either....
I got bored today and fit a couple of Ego clamping feednecks to some cocker bodies..
And made 9 or 10 additional cuts on this.....




Cheers,
Joe Petty
We have heard that a million monkeys pounding on a million keyboards would eventually replicate the works of Shakespeare. Now thanks to the Internet, we know this is not true.

Joe,

The parts SHOULD be here on friday, since i am going to be stuck kissing my girlfriends ass all day sat would you mind me dropping them off friday evening around 7?