<< Previous Topic | Next Topic >>Return to Index  

Another Old Resin Kit - Unknown 1/48 Albatros D.I/D.II

November 15 2010 at 9:20 PM

  (Login CBRent)
HyperScale Forums
from IP address 76.19.52.58

I have three of these things banging about in the model crypt. They are old and very inaccurate. (Check out the Me-109 gun-blast troughs...) I figure they will be fun to slap together.

I like to use epoxy putty in kits like this. It's crazy strong and I don't need to fool about with fixtures etc. Just stuff it in there. Adjust as needed. Let it cure. Viola!


Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

redroll.jpg

 
 Respond to this message   
AuthorReply


(Login CBRent)
HyperScale Forums
76.19.52.58

Special thanks to Mike V. for the decals. n/t

November 15 2010, 9:20 PM 

n/t

 
 Respond to this message   
Current Topic - Another Old Resin Kit - Unknown 1/48 Albatros D.I/D.II
  << Previous Topic | Next Topic >>Return to Index  

HyperScale's Group Build Guidelines

The objective of this Group Build is to encourage as many modellers as possible to build their kits and share their progress via words and photos on this Forum.

You are welcome to post general construction tips or relevant reference information and photos to this Forum too.

This Group Build will feature WWI Aircraft Kits.

  1. This Group Build will run until 31 December, 2011.

  2. Build as many kits as you like.

  3. Conversions, aftermarket and scratchbuilding are all permitted.

  4. Any markings are acceptable.

  5. Document your progress and do a write-up on your build - where did you have trouble, what improvements did you make, what markings did you choose and why? It would be GREAT if everyone would do a writeup and submit it to HyperScale as a Feature Article.
     

Posting or replying to messages on The Group Build Forum requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to:

  1. First register with Network 54, the Forum provider.Click here to register with Network 54.

  2. Then, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

 

free counters