Yes, it's that time again, time for me to dig deep into my McGee's closet and dredge up a few more goodies so I can make this month's "youse kin kep yuh neez fuh anudduh munt" payment.
As usual Paypal preferred, and shipping is extra.
VM-68-Magnum. Freshly cleaned, sealed and lubed. A little rough in spots, but it's reliable as an anvil. $90
Old-school wire-loop stock with 20-oz tank ring. Fits Sheridan/PGP/Typhoon/Stroker. Grip plates are cut and clearanced (kinda roughly) for use on a 'Phoon. $55
Angel Air tank & reg. Fresh batteries, works great. Few or no cracks in the LCD cover (I think I've only had this on the field maybe three times.) Comes with the original mounting rail, and one of my short drops.
Now that I think about it, I may have the "Lok Soks" (the nubbly tank end caps) around somewhere as well- I'll have to see if I can find those. Tank's long out of hydro, has never been rehydroed, and it's a 3-year tank. I can have it rehydroed for a buyer for 35. I'll guarantee it'll pass, there's not even a scratch on the tank. Asking $75
Complete bolt-on Racegun E-frame kit for Stroker, or PMI-based homebrew conversion.
I had this on my personal Stroker for several years, and it works great, although the battery has faded somewhat. It's an early dome-switch Race frame, and comes complete with charger and serial cable. Sorry, I don't have a copy of the Racegun software.
Also included is an adapter plate to mount the frame to the lower tube of the Stroker, a custom-built hammer with fixed sear for the Race frame, frame screws, and a Parker surface-mount solenoid. A solenoid manifold is included, but I just remembered that regular strokers have the bigger Humphries ram. The one pictured is for my custom Stroker with a Quikram, but I have some Typhoon-ram manifolds (albeit not nickeled) already made.
Asking $175, considering I usually charge $50-$60 just for the manifolds. I do have the original Race solenoid and early 'noid mount, which I'll include for $20, or sell seperately for $35.
-Complete Worrblade grip frame kit. Well used, but still works great. Bone stock, a bit tarnished here and there, but it works, and hey, they don't make these anymore. I bought it used, used it briefly, then switched to an MQ with a custom frame.
Asking $75, and I'll include free installation and testing if you're interested.
-Flattop 'Cocker front block bolts. Brand-new, hand polished. These fit flush with the front block, and fit any stock or aftermarket block that takes stock WGP O-rings. (Will not fit ANS blocks without modification.) $15.95 each
Carleton fiber-wrapped 114ci HPA tank, freshly hydroed just two months ago. Asking $70
I bought it used, used it briefly, then switched to an MQ with a custom frame.
