Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

Engine position in 67-72 F-250 4x4 ...

May 24 2012 at 1:10 PM
Mike Gaffney  (Login gaffney1951)
Members

Pulled the engine in my truck for a cam/intake swap and to correct some issues from the previous owner (cam plug in backwards, multiple leaks, etc.). The engine has the early style 2 bolt mounts and has an adapter plate that moves the engine rearward about 1 1/2". Was hoping someone with similar truck could measure from the front oil pan rail to the radiator support so I could compare to what I have. Also has anyone out there tried the new MSD Atomic throttle body efi setup? Thanks, Mike
Tried this for the first time for pulling engine. Worked pretty slick. lift the engine and roll the truck back.
[IMG][linked image][/IMG]

[IMG][linked image][/IMG]
This is the mount setup.
[IMG][linked image][/IMG]


    
This message has been edited by gaffney1951 on May 24, 2012 4:12 PM


 
 Respond to this message   
Responses