Intake Top View Photo Needed

I need a fairly closeup photo (asap) of the pcv hole on the rear of a FE intake. We need to machine off the alum welded plate on a Sidewinder and need a good photo showing the recessed area.

It'll be easier to machine much of the plate off going in from the bottom of the hole, but the difficult work will be getting the top back to original so the original lip will be there to seat the pcv plate. We'll have to machine excess alum off the bolt holes and then tap them too.

I have no bare intakes at the moment, and for some reason have no photo of one without the pcv installed.