I was afraid...April 17 2017 at 2:54 PM
|David (Login dars55)|
Response to A little light, will likely float
That I'd also need to replace the springs.
I have stock cast iron heads with stock rockers.
This started as replacing the stock intake, now we're at:
Performer RPM intake
Comp gears and chain set
And now it looks like I'm adding springs to the list too. This is a 4200lb street car with C6 and 3.70 rear that I've built to be bulletproof and I'm looking for a little more out of it - and more things for us to wrench on!
Thanks for your input.