Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

Usually 75 to 76cc.......

April 19 2017 at 8:42 PM

Blair Patrick  (Login CaptCobrajet)

Response to BBM head chamber size

The standard package that I use on heads I sell and the heads we prep for BBM "complete" is 75-76cc. Intake valve drop is .200 on a 2.200 intake valve and exhaust .270 on a 1.650 diameter. This works well with my valve job and the valves I had Ferrea make for us. The "drop" measurements may or may not be right depending on valve diameter, margin thickness, and top cuts on a valve job. This is where I settled in on my set-up, so take it with a grain of salt. CC-wise, at those depths, the volume will be close to that. I have milled the BBMs to low 60s with no issue, and even to 58cc on one pair, which was almost .110 milled off. No problem....they are THICK.
Blair Patrick

 Respond to this message