Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

C4 and 28-spline toploader are the same. Can't say for the T5, though.

April 20 2017 at 6:26 AM
Gerry  (Login gerryproctor)

Response to Re: 28-spline, 14" tailshaft housing, wide ratio. n/t

While the yoke might fit just fine, the u-joint could be different. Of course, you could solve that with a hybrid joint. You could probably discover the truth by poking around the net and finding specs for the C4/toploader and the T5 yokes.

If you really mean are all C4/toploader driveshafts the same, then absolutely not. They are different for every application. If you are buying a manufactured driveshaft for a T5 and want to use it with a toploader, then you will have to find out how long the T5 is compared to the toploader...which would be 24" from bellhousing face to tailshaft housing end on the Fairlane toploader.

 Respond to this message