Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

I'm sure you know that's no indication of PSI while running

April 20 2017 at 7:05 PM
Leland  (Login lhstanford)

Response to 482 side oiler oil pressure

I got 60 PSI while priming the system on my 406 with one of POPS blueprinted HV pumps using a 3/8 drill, but after installation I now get 80+ PSI on cold start, around 55 PSI after warm up. So, yes the 72 PSI is plenty.

 Respond to this message