No Spark on my MSDMay 16 2017 at 6:42 PM
|Pootnanny (Login Pootnanny)|
I not getting any spark on my 67 FB FE powered Mustang. I'm using and MSD 6AL box, MSD distributor and an MSD Blaster 2 coil.
I know I need to check the MSD box which I'll probably do tomorrow
I wanted to do a quick check of my coil first. I pulled the MSD Blaster 2 coil off to do an Ohms check but wanted to make sure I did it correctly. I set my multimeter at 200 and read the primary (+ post & - post) and it read 00.9 Ohms. I changed the multimeter setting to 20K. I measured off the + post and the primary post (coil wire) and it indicated a reading of 4.63.
Did I do this check correctly and do my readings indicate a coil problem?