Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

According to MSD...

May 17 2017 at 11:47 AM
Lou Manglass  (Login LouManglass)

Response to No Spark on my MSD

Your coil should read:
Primary – .7 OHMS
Secondary – 4.5K OHMS

Which is about where you are at (.9 and 4.63).

One small piece of added information, the coil wire terminal is the secondary side.

Although the coil could still have a problem, based on those readings and the fact that you have no spark, I would look elsewhere. If the coil were completely dead, you probably would not have continuity.


 Respond to this message