Fuel Tanks FinishJune 14 2017 at 3:33 PM
|Dave B (Login grandsport51)|
Response to 1964 Galaxie Gas Tank
They were terne plate and un coated except when I undecoated them in predilivery!LOL
Terneplate, steel sheet with a coating of terne metal, an alloy of lead and tin applied by dipping the steel in molten metal. The alloy has a dull appearance resulting from the high lead content. The composition of terne metal ranges from 50–50 mixtures of lead and tin to as low as 12 percent tin and 88 percent lead. The tin serves to wet the steel, making possible the union of lead and iron, which would otherwise not alloy. Terneplate is made by a process similar to galvanizing or tinplating—i.e., by dipping the sheets into a series of heated baths, the first of a zinc chloride flux, followed by the molten terne metal, and finally one of palm oil. Terneplate has the strength and formability of steel and the noncorrosive surface and solderability of terne metal. While it is still used for roofing, gutters and downspouts, and casket linings and in the manufacture of gasoline tanks for automobiles, oil cans, and containers for paints, solvents, resins, and so on, it has largely been replaced by other, more durable steel products that are easier to manufacture.
LEARN MORE in these related articles: