Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

Ross

June 17 2017 at 2:54 PM
ArnieO  (Login ArnieO)
Members


Response to Other questions

Ross I am getting the block down to the machine shop either this week or next to have the machining done , then I'll find out if the block needs to be decked the heads have been surfaced 10 . I was trying to decide so as soon as I find out how much over bore I will have to go to which pistons to go with the flat tops ( which should be 10:1 correct?) or the dished either way they will be after markets The cam is a hydraulic Oregon cams just told me the duration was 230 and 236 I figure that is at .0050 lift. According to what I have found the C8AE-H heads have from 67-70 cc chambers so with a .0010 cut they should be around 65.5 -68.5 cc from what I understand Thanks ArnieO

 
 Respond to this message   
Responses