Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

The pushrod pinch is in the intake, you can jB weld and weld the side you want to go

October 3 2017 at 10:06 AM
Bill Ballinger  (Login 65billgal)
Members


Response to truth

and redrill the port pinch for the pushrods. I have used a matrix on a Port-O-Sonic to with aluminum dust and Devcon to fill the holes I wanted to modify, welded the side redrilled the pushrod hole and the ground on the matrix of dust and Devcon to make the port just under 1.5 inches at the pinch and them widened the "inside" of the port to widen it and smooth the turn into the chamber rolling it into the short side to make port window bigger and less turbulent.

I used to do it on 340 Mopars all the time . Mopar's W2-5 head has that from Direct Connection or Racer Brown.

 
 Respond to this message