Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

if it is a tang float,

October 6 2017 at 5:52 AM
eric  (Login wwyin62)

Response to Carb float questions. If set incorrectly, and float level be somewhat corrected by adj.

you should not have to do any adjusting, it was set at the factory. with a new needle & seat it could change, but not enough to cause a problem. With a new float, yeah, it will need to be set. I bench test them with a jug of gas & a small electric fuel pump & pressurize the carb with fuel with the top off (if that is possible) and look at the level & check for flooding & accelerator pump action.

 Respond to this message