Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

 Return to Index  

Thanks very much, Dan

February 11 2018 at 10:41 AM

Button  (Login cliffrod)
Members


Response to I took some measurements of the 7-LITRE for you.

That's a big help and exactly what I need. Radiator left installed is not an issue, probably better. Fitting it under a stock hood shouldn't be as much of an issue, but making sure it fits ok with throttle linkage, pcv stuff on rear of intake is a concern.

Some if not all original ones came uncut with no carb hole, then they were cut to fit whatever was used. The one I had had been cut partway down the cone for the carb, past the bowl reliefs. Nothing had been attached to use it on a carb. Some attach the center of a base from a regular air cleaner with welding, pop rivets or similar. Makes it simple to have good clearance of linkage, adjust height, etc.

1967 Galaxie 500 Red original Q code 428
1967 Galaxie 500 White with Black stripes 428PI clone- car is dead & long gone, sold near Oak Ridge TN 2000, would love to find it.....
Please visit http://carolinasculpturestudio.com/ for pictures, information and video links to my work.

 
 Respond to this message