Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

  << Previous Topic | Next Topic >>Return to Index  

External oil filter

April 19 2017 at 2:35 PM
Jon  (Login saltshakerxxl)

Which port does the oil go to the filter? Aluminum block is on with two ports,one is taped for oil pressure line

This message has been edited by saltshakerxxl on Apr 19, 2017 2:49 PM

 Respond to this message   

(Login BattlestarGalactic)

I've had to deal with this before...

April 20 2017, 8:21 AM 

but don't know which housing you have or how different they are.

I typically just see which hole comes from the pump(before I bolt housing one) and determine it that way. How about just roll the motor over a few times? Look for some oil.

I would say the gauge is "typically" before the filter(that I have seen), but don't want to tell you wrong.

2006/2009 UMTR Points Champion

 Respond to this message   

Bill Johnson
(Login BadHenry)

the back( lower) hole

April 20 2017, 3:24 PM 

on the block is from the pump,the front(higher) hole is to block oil passages
[linked image]

66 Fairlane
427 dual quad

This message has been edited by BadHenry on Apr 20, 2017 3:27 PM

 Respond to this message   
  << Previous Topic | Next Topic >>Return to Index