Cam / lifter suggestions?August 10 2017 at 6:05 PM
Neville (Login ford_fe)
482 High riser single 4 (Sniper EFI?), C6 3k stall, 3.5 DL, 68 FB Mustang street, A/C, P/B,
Prefer hydraulic roller with some attitude at idle,
Cam selection could possibily differ with the EFI...
|August 11 2017, 3:51 AM |
Most of those TBI kits have a recommended amount of overlap to stay within.
With your rearend ratio, I would stay mild on duration, and the HR heads will like a bit more exhaust duration.
I would be at 242/252 @ .050", 110 LSA on a 104 ICL, .570" lift on the cam, with a set of Morel lifters. That's figuring on a compression ratio of around 9.8-10.
Re: Cam selection could possibily differ with the EFI...
|August 11 2017, 6:03 AM |
I am negotiable on rear gears, so in a perfect world what would you suggest?
And I calculate the compression ratio at a hair under 10:1
Depends on where you like to drive the most...
|August 11 2017, 6:53 AM |
A 3.5 gear is nice for higher driving speeds.