Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Photos  -  Links     

  << Previous Topic | Next Topic >>Return to Index  

Kelsey-Hayes brakes and rearend 1967 T-bird

February 25 2010 at 9:32 AM

BarryB  (Login BarryByer)
Members

The 428 'bird is about to go to the scrapper. The only thing left of any value is the rearend and front brake assemblies. I will not remove either unless someone wants them. All I would like is enough money to justify removing them. Say, $100 for the rear and $150 for the brakes and spindles. Wheels are gone.
Rearend is a 9 3/8, 31 spline (probably) with 3.00-1 gears.


53 F100, Volare clip, 4 wheel disc 390-wide ratio toploader
[linked image]

 
 Respond to this message   
AuthorReply

Hawkrod
(Login hawkrod)
Members

Be sure to note that a 67 Tbird is a Galaxie in disguise

February 25 2010, 1:07 PM 

The front spindles and brakes are the same as a 7 Litre etc... and have some decent value and also the wheels are the same as a Galaxie with disc brakes. A couple of rare and/or valuable parts that you may or may not have are the power seat tracks and switches, the wiring junction block on the inner passenger fenderwell (that is a rare one too!), tilt steering column and steering rag joint, tilt steering vacuum can (same as a 67 Mustang), AM/FM radio (is the same as a 67 Mustang except for the number stamped on the chassis!), power door lock switch (on the end of the speedo cable in the trans). Just thought I would mention it in case you did not know and the car still had the parts. Hawkrod

Hawkrod

39 Ford Deluxe Coupe
59 Tbird 430
60 Lincoln Premier
(2)62 Tbirds
(3)68 Cougar XR7-G's
69 Cougar 428CJ 4 speed
77 1/2 Ford F250 4X4 w/460 swap
86 SVO mustang
76 F250 Crew Cab
1969 Mach I
look at my cars past and present at superford!

 
 Respond to this message   
john tolliver
(Login jwtdvm)
Members

67 discs

February 25 2010, 1:19 PM 

hawkrod let me make sure I got this straight---67 t bird spindles will fit galaxie?? reason I ask is I sprung for a set of brakes off a 66 t bird and the spindles are different--especially as relates to the lower ball joint--so is a 67 tbird different than a 66 tbird???--if the 67 fits a galaxie I will take it --thanks john

 
 Respond to this message   

Hawkrod
(Login hawkrod)
Members

Yup, 65/6 Tbirds have a completely different steering and suspension

February 25 2010, 4:36 PM 

The 65/6 rotors and calipers will work on a Galaxie but the spindles from a Tbird only fit a Tbird (although 61-64 Tbird guys are looking for them!). In 67 Ford cheaped out and used Galaxie suspension and put a frame under the Tbird. Hawkrod

Hawkrod

39 Ford Deluxe Coupe
59 Tbird 430
60 Lincoln Premier
(2)62 Tbirds
(3)68 Cougar XR7-G's
69 Cougar 428CJ 4 speed
77 1/2 Ford F250 4X4 w/460 swap
86 SVO mustang
76 F250 Crew Cab
1969 Mach I
look at my cars past and present at superford!

 
 Respond to this message   
winr1
(Login winr1)
Members

Hey Barry..still have the axles ??

February 25 2010, 2:37 PM 

Richard.

 
 Respond to this message   

BarryB
(Login BarryByer)
Members

I do

February 25 2010, 6:55 PM 

Still have the axles...



53 F100, Volare clip, 4 wheel disc 390-wide ratio toploader
[linked image]

 
 Respond to this message   
winr1
(Login winr1)
Members

Dod you know what size the bearing retainer bolt pattern is ??

February 25 2010, 7:50 PM 

TIA.


Richard.

 
 Respond to this message   

BarryB
(Login BarryByer)
Members

I'll find out and get back to you.

February 27 2010, 10:36 AM 

But I would assume big bearing being a factory 9 3/8" with 31 spline.


53 F100, Volare clip, 4 wheel disc 390-wide ratio toploader
[linked image]

 
 Respond to this message   
john tolliver
(Login jwtdvm)
Members

t bird brakes

February 26 2010, 5:19 AM 

I will take them spindles/rotors/calipers/ please get hoses in case needed to mock up some mew ones---also please get any proportion valve/residual valve---email at jjrtolliver@bellsouth.net or call 404-409-3094--thanks

 
 Respond to this message   

BarryB
(Login BarryByer)
Members

Argg!

February 26 2010, 7:48 PM 

You're killing me!
Okay, I'll tear it off, it'll take a few days. I'll let you know on shipping.
Please send your address

Thanks

Barry


53 F100, Volare clip, 4 wheel disc 390-wide ratio toploader
[linked image]

 
 Respond to this message   
john tolliver
(Login jwtdvm)
Members

67 brakes

February 27 2010, 5:02 AM 

thanks a bunch---john tolliver 2632 HWY 20 Grayson GA 30017

 
 Respond to this message   

BarryB
(Login BarryByer)
Members

Okay

February 27 2010, 10:35 AM 

It'll be a few days, I'm back to work now so...


53 F100, Volare clip, 4 wheel disc 390-wide ratio toploader
[linked image]

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index