bezel. The 8000 is a bit smaller, and the insert need to be modified. But the 6105, 6309, 7002 right up to the newer ones, the skx007, 009 ect. all take the same insert.
The insert on the 6159 is actually epoxied in, you have to go through the glow dot, and pry it up. It does not come out undamaged. Also, the insert is a differrent size, the OD is correct, but the ID is smaller on the bezel itself. So I chucked the bezel in the lathe, and opened up the inside ID ring, so that a standard insert would fit
Scoring disabled. You must be logged in to score posts.
