Home > Discussion Groups > New Products

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=78968&messageid=1113823358
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Not quite, but...

June 25 2009 at 1:06 AM		   (Login RobertSkipper)
Missing-Lynx members
from IP address 99.2.118.229


Response to It's spot on
It IS quite an impressive model nonetheless. This may be due to differences in a prototype used here in the US and what is being fielded in Iraq.
In looking at all of my photos from Iraq I notice quite a few discrepancies, some minor, some major.
The proportion of the turret as a whole seems to be off. Compare the rear of the turret with the photo below. Another example is the notch in the top of the front right side turret armor. It is way too far forward comparted to the photo below. Another minor detail is how bolt for the right side driver's armor plate is too low in relation to the window-it is almost centered when it should be nearly online with the top edge. Much of the no-slip doesn't appear quite right either. Granted, some of these things are minor, but the turret proportions definitely need to be remedied.
Again, these discrepancies my indeed be due to a prototype being used, and I don't want to bash what appears to be a very fine model before it even comes out.

[IMG][linked image][/IMG]

 
 Respond to this message   


Terms and Conditions of Use Report abuse