Home > Discussion Groups > New Products

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=78968&messageid=1113823358
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

Leopard Workshop Leopard 2A6M CAN conversion

August 23 2017 at 4:10 PM
Michael Shackleton  (Login michael.shackleton)
Missing-Lynx members
from IP address 82.14.113.241

http://leopardclub.ca/workshop/LW040/

This represents the latest version of 2A6M CAN - Canada's front-line tank alongside the 2A4M CAN (which gets all the publicity). Having gone through a thorough rebuild programme following their return from Afghanistan to Canada, modifications include mine protection belly armour (hence the 'M' designation), reinforcement strakes under the engine compartment, glacis armour plate, a crew cooling unit in the right rear hull, the option of ECM boxes mounted on the rear turret roof, 'T' antenna mounts, and mounting points for the addition of slat armour and engineering attachments at the front.

The modifications in this set are the latest upgrades to these vehicles at the time of this set's release. There is a final configuration of 2A6M CAN - the real vehicles look different from tank to tank as most are currently at different stages of modification. It will take some time to bring them all to the same final standard.

The set includes nearly 40 resin parts, three photo-etch sheets for engine deck grilles, optional ECM boxes and turret basket etch, amongst other things. Also included are LW014B turned brass antennae set and LW027B 6+2 smoke launchers.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse