Home > Discussion Groups > Dioramas

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=78970&messageid=1113823195
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

LCVP. WW II Allied Landing Craft

March 22 2002 at 2:40 PM
Ronny Noben  (no login)
from IP address 213.224.83.110

Hi,

I want to build a small invasion dio in 1/35.

I need drawings/plans on a LCVP. WW II Allied Landing Craft (Higgins boat)

Can someone help me?

Tnx

Ronny

 
 Respond to this message   
AuthorReply
Mike Powell
(no login)
24.247.45.118

Try Here

March 22 2002, 6:44 PM 

http://floatingdrydock.com/

mpowell@chartermi.net

 
 Respond to this message   
Phil Stutcinskas
(Login philstutcinskas)
Missing-Lynx members
213.1.45.2

Good source for landing crafts

March 24 2002, 1:31 PM 

not sure of the actual adress but there is a SIG( special interest group) within the IPMS UK dedicated entirely to this subject, they have all sorts of stuff for sale too including 35th scale kits and i think plans too .The guys who run it are very knowledgeable and I m sure they will have what you want.
wish I could give you an actual adress, maybe some one else knows how to contact SIGS.
Phil Stutcinskas

 
 Respond to this message   
Dus Adele
(no login)
195.92.67.75

Lindberg.

March 24 2002, 1:38 PM 

Hi mate,I seem to recall
that a reissue of a Lindberg
LCVP was released a couple of
years ago.My mate bought one,
it needs a bit of detailing but
it's a good start point.Sorry
no idea of a source in the UK.
Regards
Dus.

 
 Respond to this message   
Brian Murdoch
(no login)
62.64.206.125

IPMS(UK) SIG Landing Craft

March 24 2002, 3:08 PM 

The SIG is run by Allen Hill,I will E_Mail you his address as he dosn't appear to have an e-mail add.

 
 Respond to this message   
Joe Ford
(no login)
129.11.159.162

Contact address

March 26 2002, 5:33 AM 

Dear Brian,

You say you have a contact address for someone in a SIG that deals in Landing Craft and Riverine craft - a person by the name of Allen Hill?

Could you please pass his address on to me?

I'm in the process of scratch building a 1:35 US Monitor gun boat and would be interested in contacting any members of this group for discussion and ideas.

Regards,
Joe

 
 Respond to this message   
Ronny Noben
(no login)
213.224.83.174

Tnx for the response n/t

March 25 2002, 1:08 AM 

.

 
 Respond to this message   
peter regan
(no login)
205.188.198.32

landing craft

March 26 2002, 12:39 AM 

hi
not only do the sig specialise in landing craft of ww11 but vietnam brown water navy and i believe russian river craft.

 
 Respond to this message   
Chuck McNeese
(Login chuckmcneese)
67.97.52.234

LCVP kit 1/35th scale

March 26 2002, 1:36 AM 

Hi Ronny,
Here's a link for you, to the Fonderie Miniatures LCVP kit. I've heard their pretty nice.

http://www.squadron.com/ItemDetails.asp?item=fn8001&Submit3=Go
HopeThisHelps
Chuck
_zippylip@hotmail.com_

 
 Respond to this message   
andrew wooltorton
(no login)
210.84.84.81

landing craft

May 18 2002, 5:49 PM 

howdy ronnie, there is a new company in australia called atlas models and they make a kit of the said landing craft and from memory i think it costs about eighty bucks if this interests you you can find there website on pmms website in the kit update section. all the best, andy.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse