Home > Discussion Groups > Dioramas

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=78970&messageid=1113823195
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

Mud in wet look

January 22 2003 at 9:17 AM
VICTOR LEE  (Login mrtaktak)
from IP address

Hi, anybody can give me an idea how to make mud in wet look as the ground work. Thanks!

 Respond to this message   
ian sadler
(no login)

wet mud answer

January 22 2003, 11:00 AM 

hi try out mixing gloss varnish with your paint base colour, then leave to dry, then touch up the very tops by dry brushing matt vasnish to simulate drying out , as always try on a scrap or as a test peice to perfect usage cheers ian

 Respond to this message   
Pierre Piveteau
(no login)


January 31 2003, 9:11 AM 


Rather using gloss varnish try resin. U used it like a varnish and now u'll be sure that your mud seems to be wet.




 Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Terms and Conditions of Use
Report abuse