Take a piece of metal piping a little wider then your barrel then cut 2 inches of it off and put some rubber (go to your local bike store and ask for a junk inner tube) lineing in it so it does not scratch your gun then take 2 screws and drill 2 holes in the pipe where you want your "legs" to be then take something like pvc pipe (plastic its dirt cheap) and put a pvc pipe "cap" on both ends then drill two out of the 4 caps (2 caps for each bipole)the size of the 2 screws put a nut inside of each bipole and put the screws under the lining through the holes and into the pvc pipe cap then screw the screws into the nut on the other side of the cap then put the length of pvc pipe on the cap and walaa!!!!!!! Email me @ paintball090@yahoo.com and tell me what ya think even if u have not done it!