Airgun forum

America's #1 Airgun Forum Founder: James Kitching The Forum That Never Sleeps is www.yellowforum.com Crosman/Benjamin PCP BOI Off Topics Chinese GAMO Archives TALON Events FieldTarget AMW Dealer BOI Airgun Classifieds Forum INDX Click To become a Poster FX Royale by Lamar F A Q CA FT 2009 Tony Report Brushy Bill's Upload Pic tutorial
Visitors in this forum in the last 10 minutes: 85 Visitors AEROSOAR, Augydogy, bburd, cartertools, DKOwen, donwalk, DYNAIR, fperez0209, gubb33ps, Herb1836, randyhub, RBest, reschlund, rhew, RogerV55, socalmatt, tallsaul, tracer69, 67 guests

Not logged in | Login | Create Account

Search Chat! Yellow Classifieds Post

Anybody tried one of these ?? Rhom Twinmaster Allrounder Expand Thread - BBGun Bob on Nov 21, 2009, 11:35 AM

What is moly called in the hardware stores? Expand Thread - tallpaul on Nov 21, 2009, 10:54 AM

Moly? - Doug Owen on Nov 21, 2009, 11:16 AM

Automotive stores may have it. - Rob Hawkins on Nov 21, 2009, 11:21 AM

I've bought it under two names - Russell Best on Nov 21, 2009, 11:23 AM

Honda Moly - Jim on Nov 21, 2009, 11:32 AM

thanks Guys... I will get some JM stuff but may grab some local for now - I have to take - tallpaul on Nov 21, 2009, 11:43 AM

Longrange .25 shooters your opinions please on the best combination Expand Thread - Randy on Nov 21, 2009, 10:40 AM

Mac1 Marauder? Expand Thread - HamboneinVA on Nov 21, 2009, 7:57 AM

I have one - Terry on Nov 21, 2009, 8:23 AM

Terry, please post this again after you get it back - Bruce Dodson on Nov 21, 2009, 9:09 AM

A few more things - Bruce Dodson on Nov 21, 2009, 9:24 AM

Contact info for Greg - Bob Jarrard on Nov 21, 2009, 9:42 AM

Greg does not have a web site yet - Bruce Dodson on Nov 21, 2009, 10:05 AM

Report - Terry on Nov 21, 2009, 9:50 AM

Terry, please post this again after you get it back - Bruce Dodson on Nov 21, 2009, 10:02 AM

"Greg is the only one they can make them shoot"? - Adam SoCal on Nov 21, 2009, 10:21 AM

I am not tearing down others - Bruce Dodson on Nov 21, 2009, 11:22 AM

I have one also - No Problems! - Mike Tipton on Nov 21, 2009, 9:35 AM

Sure, I got one...... - Doug Owen on Nov 21, 2009, 9:44 AM

Good price! - HamboneinVA on Nov 21, 2009, 10:10 AM

The only one? - Bruce Dodson on Nov 21, 2009, 10:23 AM

That's a big change..... - Doug Owen on Nov 21, 2009, 11:37 AM

Mike T ...................... I presume that you missed my response to your questions Expand Thread - Yrrah on Nov 21, 2009, 3:24 AM

I wonder if MAC1 will be tuning these?!... Expand Thread - ricdoug on Nov 21, 2009, 3:22 AM

You think? - Doug Owen on Nov 21, 2009, 9:54 AM

Or Rich in, Mich. - foxback on Nov 21, 2009, 10:08 AM

Will have to see what changes... - robert on Nov 21, 2009, 10:24 AM

Can anyone shed some light on how barrels are made? Expand Thread - Rob in Pgh on Nov 21, 2009, 2:22 AM

I have a couple LW .20 barrels that look hammer forged. nt - joe on Nov 21, 2009, 2:34 AM

Air rifle barrels are generally" button rifled" but some are - Yrrah on Nov 21, 2009, 3:06 AM

stupendous claims? - Emouse on Nov 21, 2009, 3:57 AM

Nick, I think I wrote that some air rifle barrels are "cut" .... - Yrrah on Nov 21, 2009, 5:33 AM

Just to be pedantic I'll chip in - CO222 on Nov 21, 2009, 7:54 AM

marks in the barrel can also be from a bad reamer - Russell Best on Nov 21, 2009, 9:14 AM

I think Harry made himself very clear - Eddie on Nov 21, 2009, 8:30 AM

I believe that DAQ used cut rifling on his big - Al on Nov 21, 2009, 10:51 AM

There's nothing wrong with Sako's forged barrels - CO222 on Nov 21, 2009, 5:04 AM

Winchesters are also hammer forged - Russell Best on Nov 21, 2009, 9:02 AM

Walther and HW and Diana are button rifled - Russell Best on Nov 21, 2009, 8:58 AM

Did they answer your question? - RedFeather on Nov 21, 2009, 9:16 AM

Quackenbush on Airgun Barrels - Greg on Nov 21, 2009, 9:23 AM

some good info there - Russell Best on Nov 21, 2009, 9:39 AM

Interesting rifle on a hungarian airgun site (Edited - this is not an air rifle) Expand Thread - joe on Nov 21, 2009, 1:06 AM

Who sells the entire line of Falcons? Expand Thread - Rob in Pgh on Nov 21, 2009, 12:59 AM

I believe Pomona Air does nt - anewguy on Nov 21, 2009, 2:12 AM

compasseco Christmas sale 25% coupon???? Expand Thread - joe on Nov 21, 2009, 12:35 AM

Got it too - Nathan on Nov 21, 2009, 12:58 AM

Re: Got it too - joe on Nov 21, 2009, 1:02 AM

Same here ... - Jim on Nov 21, 2009, 8:20 AM

A shocking notion...if a handsome blued finish were available on the M-rod Expand Thread - scot laughlin on Nov 21, 2009, 12:19 AM

Wrong material? - Doug Owen on Nov 21, 2009, 12:45 AM

I believe it would help sales - Bruce Dodson on Nov 21, 2009, 3:03 AM

Matter of Taste I Suppose?? - Grant. on Nov 21, 2009, 3:03 AM

Agreed - Bruce Dodson on Nov 21, 2009, 3:14 AM

Heads up - CO222 on Nov 21, 2009, 4:52 AM

pardon my ignorance, what's the difference between bluing and anodizing? - anewguy on Nov 21, 2009, 4:37 AM

I share in your ignorance. - Rob in Pgh on Nov 21, 2009, 4:59 AM

Bluing is for steel Anodise is for aluminum - Woody on Nov 21, 2009, 6:39 AM

both the guns shown are neither-- they have plated actions. - Russell Best on Nov 21, 2009, 9:28 AM

Anodizing, plating, and metal finishing... - DaveG on Nov 21, 2009, 9:31 AM

bluing & anodizing - Herb1836 on Nov 21, 2009, 11:17 AM

I think the next step for Crosman.... - Glenn Davis on Nov 21, 2009, 10:07 AM

need pics, can't decide between a silver or gold trigger guard Expand Thread - anewguy on Nov 20, 2009, 11:26 PM

what type of airgun is this going on? ...nt - L. Smith on Nov 21, 2009, 12:08 AM

Another rainy night with the P1 (graphic) Expand Thread - AGF on Nov 20, 2009, 11:19 PM

Re: Another rainy night with the P1 (graphic) - FT91 on Nov 20, 2009, 11:36 PM

I live in - AGF on Nov 20, 2009, 11:50 PM

How do you like the TK 11? - Gary Follansbee on Nov 20, 2009, 11:44 PM

The TK11 R2 is the best flashlight - AGF on Nov 20, 2009, 11:53 PM

Re: The TK11 R2 is the best flashlight - Gary Follansbee on Nov 21, 2009, 12:15 AM

Another fine kill, AGF! And, yes, anyone wanting to try one is welcome - The Verminator on Nov 20, 2009, 11:53 PM

Idleback Chair? Expand Thread - ohiochuck on Nov 20, 2009, 10:30 PM

my first missouri buck (PIC) Expand Thread - largebore on Nov 20, 2009, 10:20 PM

Excellent! This is what I LOVE to see... - The Verminator on Nov 20, 2009, 10:27 PM

I donated the meat - largebore on Nov 20, 2009, 10:29 PM

Even better!! I don't get the show here, but I wish I did... - The Verminator on Nov 20, 2009, 10:36 PM

Sorry, episodes Will NOT be available on the web - Paul on Nov 21, 2009, 12:31 AM

Cool! I'm looking forward to seeing 'em..nt - The Verminator on Nov 21, 2009, 12:46 AM

DAMM NICE JOB - BIG MIKE on Nov 20, 2009, 10:37 PM

What TV show? NT - Terry in LP on Nov 20, 2009, 11:32 PM

American Airgunner, on Sportsman Channel -NT- - Paul on Nov 21, 2009, 12:30 AM

Double lung shot? - BlackHogDown(Seth R) on Nov 21, 2009, 1:25 AM

Congratulations! - Bruce Dodson on Nov 21, 2009, 3:07 AM

Nice kill, Eric. Ken Cox did an outstanding job at changing Missouri's... - ricdoug on Nov 21, 2009, 3:20 AM

compensator Expand Thread - Roy Creiglow on Nov 20, 2009, 9:53 PM

I have a spare one for the K60... - Bob D. on Nov 20, 2009, 11:09 PM

I've got one - Gary in St Louis on Nov 21, 2009, 9:31 AM

Made it to Pulaski, TN.....looking forward to.... Expand Thread - Randy Mitchell on Nov 20, 2009, 9:46 PM

lucky you! I'm sure you're going to enjoy yourself. <nt> - Jonathan on Nov 20, 2009, 10:16 PM

So, you are at "Airgunner's Mecca"? Lucky you! I cut my FT teeth there - The Verminator on Nov 20, 2009, 10:39 PM

Wish you could have made it bro- - SteveV on Nov 21, 2009, 6:33 AM

Good deal Randy- - SteveV on Nov 21, 2009, 6:30 AM

My Winchester 427 (Diana 27) won't cock..... Expand Thread - Brad on Nov 20, 2009, 9:23 PM

Post over on the Vintage forum - RedFeather on Nov 20, 2009, 9:59 PM

look at - alb77 on Nov 20, 2009, 10:12 PM

Was just messing with an old Haenel and he's right - RedFeather on Nov 20, 2009, 10:24 PM

Good grief........now I gotta dig through packing peanuts - Brad on Nov 20, 2009, 10:38 PM

I didn't find a loose spring. Now what?? - Brad on Nov 21, 2009, 1:09 AM

taking the piston/trigger latch assy apart on that gun can be a pain in butt. - Russell Best on Nov 21, 2009, 11:34 AM

are heavy pellets hard on springers Expand Thread - tony on Nov 20, 2009, 9:09 PM

do a search - AGF on Nov 20, 2009, 9:39 PM

Re: do a search - Chris on Nov 20, 2009, 11:06 PM

Define bad... - brent saunders on Nov 21, 2009, 1:07 AM

My Gamo 220 in .177cal... - Christopher on Nov 21, 2009, 7:43 AM

My two cents... - Rob Hawkins on Nov 21, 2009, 9:15 AM

We mulled over this on another forum - RedFeather on Nov 21, 2009, 9:20 AM

thanks for the info - tony on Nov 21, 2009, 11:03 AM

My thanks to Verninator for the afternoon off Expand Thread - Reinder Schilsky on Nov 20, 2009, 8:57 PM

Great Post Reinder! Glad you had the time and took the effort - Jamie on Nov 20, 2009, 9:07 PM

Great write up, - Brushy Bill on Nov 20, 2009, 9:18 PM

C'mon Brushy! Fire up the orange and git after 'em! - Jamie on Nov 20, 2009, 9:35 PM

Yea, OK, stop twisting my arm, - Brushy Bill on Nov 20, 2009, 10:09 PM

G'won, now! Ya know ya wanna... - The Verminator on Nov 20, 2009, 10:16 PM

Good for you, Reinder! I'm glad I had a positive influence on you.. - The Verminator on Nov 20, 2009, 10:03 PM

What a neat outing - Diamondback on Nov 21, 2009, 12:27 AM

Nice post Reinder - SteveV on Nov 21, 2009, 6:52 AM

With him in spirit - Gary in St Louis on Nov 21, 2009, 9:37 AM

Another rifle and another dead squirrel.........graphic Expand Thread - william on Nov 20, 2009, 8:49 PM

Nice rifle and picture, - Brushy Bill on Nov 20, 2009, 8:56 PM

36 in the freezer.............so far - william on Nov 20, 2009, 9:01 PM

Yum.. nt - Jeff on Nov 20, 2009, 9:13 PM

oooh that sounds good - shannon on Nov 20, 2009, 9:20 PM

Re: oooh that sounds good - william on Nov 20, 2009, 9:53 PM

Man, that sounds like a good recipe. Beautiful gun and squirrel... - The Verminator on Nov 20, 2009, 10:06 PM

Scope on a HW25L? Expand Thread - Cliff on Nov 20, 2009, 8:30 PM

yep, let me know if you wanna see my 25( how a scope looks on it) - Yuv on Nov 20, 2009, 9:12 PM

I would like to see... n/t. - brent saunders on Nov 21, 2009, 1:08 AM

My Daystate Grand Prix so far Expand Thread - Helder on Nov 20, 2009, 8:03 PM

Looks like a great benchrest gun...how's it off the knee? - Tony on Nov 20, 2009, 8:13 PM

Very nice - Bruce Dodson on Nov 20, 2009, 9:02 PM

Lube and Chrono..? - JohnnyI on Nov 20, 2009, 9:40 PM

so far no problem - Helder on Nov 20, 2009, 11:10 PM

What will happen when sensors do get dirty? - Bruce Dodson on Nov 21, 2009, 3:12 AM

Re: What will happen when sensors do get dirty? - Helder on Nov 21, 2009, 3:40 AM

Sounds to me like it would be better - Bruce Dodson on Nov 21, 2009, 9:53 AM

Info from Daystate on chrony - Mike V on Nov 21, 2009, 10:21 AM

exactly, and also - Helder on Nov 21, 2009, 10:28 AM

One more crow busted Bullpup style, graphic. Expand Thread - foxback on Nov 20, 2009, 7:52 PM

Is the safety ball bearing for the 2240 same as the cocking slide of a CR600? Expand Thread - Randy on Nov 20, 2009, 6:58 PM

Sure looks like it..... - Doug Owen on Nov 20, 2009, 8:13 PM

Does barrel length affect long range accuracy? Expand Thread - Steve in CT on Nov 20, 2009, 5:47 PM

No - LL on Nov 20, 2009, 6:09 PM

Here is a thought - Mike on Nov 20, 2009, 6:11 PM

ack ack!! he said lock time!!! - dan house on Nov 20, 2009, 6:22 PM

The devil made me do it. - Mike on Nov 20, 2009, 6:25 PM

"lock time" is two words! n/t - Dan Bollinger on Nov 20, 2009, 6:29 PM

O sure argue syntactical correctness...... - dan house on Nov 20, 2009, 6:33 PM

I was being funny, You're the one who is apparently being serious. ;) n/t - Dan Bollinger on Nov 20, 2009, 7:46 PM

You are both funny - Steve in CT on Nov 20, 2009, 8:00 PM

Steve there's still a specialist's job for you in Cambodia. - Yrrah on Nov 20, 2009, 8:54 PM

I'm not falling for that trap, but by the same measure - Russell Best on Nov 20, 2009, 7:08 PM

How mucjh stabillizing spin can a 2" barrel's rifling put on a bullet? - M'hackett on Nov 20, 2009, 8:33 PM

Same as any other length, right? - Doug Owen on Nov 20, 2009, 8:54 PM

And what the heat and muzzle blast does to the rear end of a lead bullet when the barrel - Yrrah on Nov 20, 2009, 9:01 PM

maybe yes, maybe no... - Herb1836 on Nov 20, 2009, 6:14 PM

Yes!! We can't ignore internal ballistics - CO222 on Nov 21, 2009, 12:52 AM

ok, I'll bite.... - dan house on Nov 20, 2009, 6:20 PM

Why can't AGers say lock time? It's real in the AG world... -nt - John on Nov 20, 2009, 6:32 PM

hehe John you obvisouly missed the prior discussion of this - dan house on Nov 20, 2009, 6:47 PM

My 909 has a quick enough "lock time" that it impressed at the range. - M'hackett on Nov 20, 2009, 8:29 PM

Ahem... Playing the Devil's Advocate... - Dan Bollinger on Nov 20, 2009, 6:33 PM

If it's stable...it's stable... - robert on Nov 20, 2009, 6:38 PM

Re: Ahem... Playing the Devil's Advocate... - dan house on Nov 20, 2009, 6:41 PM

I'll agree to exit pressure... - robert on Nov 20, 2009, 6:51 PM

Who said higher exit pressure? - Steve in CT on Nov 20, 2009, 7:19 PM

How else to get a short barrel... - robert on Nov 20, 2009, 7:29 PM

No other magic .. Steve will work it out ... nt ... H. - Yrrah on Nov 20, 2009, 7:39 PM

Harry any length of barrel will use a certain amount of air - Steve in CT on Nov 20, 2009, 7:45 PM

Agree... - robert on Nov 20, 2009, 7:56 PM

I understand the question Steve. - Yrrah on Nov 20, 2009, 8:02 PM

NOOOOOO LOL nt - Steve in CT on Nov 20, 2009, 8:15 PM

In respect to "wiggle" time and its aftermath .......... - Yrrah on Nov 20, 2009, 7:53 PM

Harry I didn't make the original post detailed enough I guess. - Steve in CT on Nov 20, 2009, 7:59 PM

If the true answer to my question above is ... yes - Yrrah on Nov 20, 2009, 8:19 PM

As the answer above was NOOOOOO LOL ... then - Yrrah on Nov 20, 2009, 8:43 PM

LOL I wouldn't chop your barrel no. If it ain't broke don't fix it Harry - Steve in CT on Nov 20, 2009, 8:53 PM

With four of the five in just 0.30" I think I may see sub half inch - Yrrah on Nov 20, 2009, 9:05 PM

Are you about to become a .25 fan? - robert on Nov 20, 2009, 9:12 PM

That's a hard one. - Yrrah on Nov 20, 2009, 11:01 PM

Would that my questions... - robert on Nov 20, 2009, 11:48 PM

If we can buy better BC by increasing weight but not at the expense - Yrrah on Nov 21, 2009, 2:06 AM

So long as it's a mental exercise... - robert on Nov 20, 2009, 8:03 PM

All of that Robert. Steve has worked out the Exit pressure thing. NT.. H. - Yrrah on Nov 20, 2009, 8:24 PM

Darn...was hoping for that free lunch. - robert on Nov 20, 2009, 8:35 PM

LOL nt - Steve in CT on Nov 20, 2009, 8:48 PM

On harmonics Robert, read what I was writing while you wrote that response ..... - Yrrah on Nov 20, 2009, 8:49 PM

If you are using iron sight yes - Adam SoCal on Nov 20, 2009, 6:30 PM

Olympic match rifles have short barrels - Ter on Nov 20, 2009, 6:36 PM

10m isn't exactly long range nt - JC on Nov 20, 2009, 6:40 PM

Olympic Match smallbore rifles have very long barrels... - MIke T. on Nov 20, 2009, 6:49 PM

Olympic Match smallbores are shot with aperture sights ... Adam has made the relevant - Yrrah on Nov 20, 2009, 6:57 PM

Short barrels with bloop tubes seldom win.... - MIke T. on Nov 20, 2009, 10:16 PM

Ehem, you are showing smallbore .22lr rifles... - Bob D. on Nov 20, 2009, 11:19 PM

Steve, why are you asking this? - dan house on Nov 20, 2009, 6:53 PM

Dan... I think you figured it out! - Tim on Nov 20, 2009, 6:55 PM

Dan I was asked something similar in an email earlier today. - Steve in CT on Nov 20, 2009, 7:17 PM

What do I know, but if using open sights it sure does - M'hackett on Nov 20, 2009, 8:06 PM

I think this is a trick question... - Bob D. on Nov 20, 2009, 8:19 PM

lol...steve needs a girl friend? - AGF on Nov 20, 2009, 8:41 PM

hee heee heeee maybe you should... - Steve in CT on Nov 20, 2009, 8:50 PM

just keeping it - AGF on Nov 20, 2009, 8:55 PM

I do I do but I still think - Steve in CT on Nov 20, 2009, 8:58 PM

your post - AGF on Nov 20, 2009, 9:12 PM

Whoa. I didn't think a small tease would take us so far off track... n/t - Bob D. on Nov 21, 2009, 12:17 AM

I personally believe that - Brushy Bill on Nov 20, 2009, 8:55 PM

21" is more accurate than the 12" - Beekeeper on Nov 20, 2009, 9:04 PM

Might rethink that. - robert on Nov 20, 2009, 9:15 PM

I never seen a sniper using handgun to shoot, ever! - Beekeeper on Nov 20, 2009, 9:15 PM

LEts put them on equal footing... - robert on Nov 20, 2009, 9:24 PM

Accuracy - carmine on Nov 20, 2009, 10:10 PM

Assuming the power is adjusted to give same exit MV - William Piatt on Nov 20, 2009, 10:13 PM

report - scott fleming on Nov 20, 2009, 10:16 PM

Rate of Twist should be the same, regardless of length - RedFeather on Nov 20, 2009, 10:20 PM

Yes & No - Charles Mellon on Nov 20, 2009, 10:40 PM

Not at the Camp Perry matches I've been to... - MIke T. on Nov 20, 2009, 10:45 PM

Charles the thread stipulated same MV for the long and short barrel. - Yrrah on Nov 20, 2009, 11:24 PM

Still - Charles Mellon on Nov 21, 2009, 12:08 AM

Congrats, Steve, you win thread of the day! LOL! /nt - Bob D. on Nov 21, 2009, 12:20 AM

Right away my thoughts go to the TX200. HC vs. MkIII. - Rob Hawkins on Nov 21, 2009, 9:38 AM

I have the answer!!! (in my not so humble opinion) - Dan Bollinger on Nov 21, 2009, 10:19 AM

Re: Does barrel length affect long range accuracy? - donwalk on Nov 21, 2009, 11:46 AM

Need help with ProSport trigger adjustment Expand Thread - surfdog on Nov 20, 2009, 5:16 PM

This is what I use - Paul on Nov 20, 2009, 6:11 PM

Thanks Paul, that's one of the links I used... - surfdog on Nov 21, 2009, 9:38 AM

are you overtightening the trigger guard screws? - Russell Best on Nov 21, 2009, 11:40 AM

Diana 34 Home Rebuild Expand Thread - Jim on Nov 20, 2009, 4:45 PM

Email sent - Yuv on Nov 20, 2009, 5:16 PM

Email sent as well.... n/t - Casey in San Diego on Nov 20, 2009, 5:46 PM

Good Reading - Greg on Nov 20, 2009, 6:18 PM

Tune - 17bullet on Nov 20, 2009, 6:28 PM

Not much??? WOW! - roland cannon on Nov 20, 2009, 6:49 PM

I should have mentioned - 17bullet on Nov 20, 2009, 11:38 PM

Seeing it - Jim C on Nov 20, 2009, 6:50 PM

need Anthony Story's contact info..thanks Expand Thread - atlshooter1 on Nov 20, 2009, 4:22 PM

email... - Jeff P on Nov 20, 2009, 5:22 PM

Tech Force PCP email just came to me. Link to website inside this post... Expand Thread - John on Nov 20, 2009, 4:17 PM

they are betting hardcore on this product...... - john on Nov 20, 2009, 4:27 PM

it said that it would be available in a kit for retro fitting,,,,n/t - Brushy Bill on Nov 20, 2009, 4:37 PM

they will sell a jillion of them - chuck on Nov 20, 2009, 4:52 PM

Re: Tech Force PCP email just came to me. Link to website inside this post... - robert on Nov 20, 2009, 5:10 PM

one important question... - rumme on Nov 20, 2009, 5:21 PM

Single shot...which is the way to go IMHO - robert on Nov 20, 2009, 5:25 PM

I agree, I am very happy with a single shot,, to each his own,,,n/t - Brushy Bill on Nov 20, 2009, 5:33 PM

Hopefully they will be selling the tube and internals nt - Jonathan on Nov 20, 2009, 5:37 PM

They did say in the video that they would be available,,,n/t - Brushy Bill on Nov 20, 2009, 5:38 PM

not for me - rumme on Nov 20, 2009, 5:37 PM

No disrespect, but... - Walter Riddle on Nov 20, 2009, 9:06 PM

dial down a bit you say ? - rumme on Nov 20, 2009, 10:18 PM

there already is a after market 8 shot mag - buster on Nov 20, 2009, 6:30 PM

It's a single shot...... - Doug Owen on Nov 21, 2009, 1:19 AM

Just curious....at this pricepoint why this over a Discovery? - Casey in San Diego on Nov 20, 2009, 5:50 PM

Bit cheaper ... - Herb1836 on Nov 20, 2009, 6:08 PM

multi shot capability of tech force ? - rumme on Nov 20, 2009, 6:13 PM

As I will have both, Disco and QB, some reasons - robert on Nov 20, 2009, 6:29 PM

Target stock - Storz on Nov 20, 2009, 7:12 PM

It's in the trigger... Expand Thread - Donovan Taylor on Nov 20, 2009, 3:55 PM

A little help please. Plainsman 175 Expand Thread - Larry in Michigan on Nov 20, 2009, 3:53 PM

Plainsman - Bob Palumbo on Nov 20, 2009, 6:13 PM

Thanks Bob. - Larry in Michigan on Nov 20, 2009, 6:50 PM

JSB Heavy tin number... Expand Thread - Keth on Nov 20, 2009, 3:49 PM

Think someone - Rich Woods on Nov 20, 2009, 4:18 PM

First try... - Keth on Nov 20, 2009, 5:22 PM

Harry alias Yrrah posted the following on the FT Forum - Ramon A. Seneriz on Nov 20, 2009, 6:09 PM

Which batch of heavies are the bad ones? - Rick G on Nov 20, 2009, 6:38 PM

made in ???????? Expand Thread - eric on Nov 20, 2009, 3:48 PM

Crossman Factory is real - throggy on Nov 20, 2009, 4:08 PM

well, I just now got an email from Compasseco... the new Tech Force PCP rifle... - Lymon on Nov 20, 2009, 4:10 PM

Do you also believe in Ghosts and UFOs? - Bob D. on Nov 20, 2009, 4:51 PM

Crosman's a Good Neighbor - Greg on Nov 20, 2009, 6:32 PM

I Bet . - Grant on Nov 20, 2009, 7:39 PM

I bet it sure could Grant! - airbuff on Nov 20, 2009, 8:03 PM

Hi Rob. - Grant. on Nov 21, 2009, 3:07 AM

Is it just me or do you guys see alot of RAPIDS up for sale? Expand Thread - CheckUrSix/Donald on Nov 20, 2009, 3:26 PM

Not more than usual - Helder on Nov 20, 2009, 3:31 PM

Maybe, however the Weight of the Rapid spec is not favorable. - CheckUrSix/Donald on Nov 20, 2009, 3:35 PM

Agreed - look at the parts list for the FX - TC on Nov 20, 2009, 3:41 PM

Maybe, but one can not refute technology. - CheckUrSix/Donald on Nov 20, 2009, 4:02 PM

A fine gun will always be a fine gun don't you think. - Raymond Pratt on Nov 20, 2009, 6:34 PM

probably everybody is selling them to buy up superior Discos & Mrods! - Jim on Nov 20, 2009, 3:39 PM

LOL, I also bought the mrod, kept the Rapid though - anewguy on Nov 20, 2009, 4:00 PM

Funny I noticed the same thing. - Ter on Nov 20, 2009, 6:39 PM

For a long time the Rapid was King - Bruce Dodson on Nov 20, 2009, 8:52 PM

Bruce, just curious if the wolf comes in a .25 version? NT. - Daryl12 on Nov 21, 2009, 8:44 AM

.25 Wolf? - Bruce Dodson on Nov 21, 2009, 10:15 AM

first pair of .25 Trident actions almost ready Expand Thread - DaveG on Nov 20, 2009, 3:17 PM

Looks great to me, Dave! - Daniel Koster on Nov 20, 2009, 8:01 PM

FEG GPM take down and re-seal guide pictures Expand Thread - Tim on Nov 20, 2009, 3:16 PM

Deep Thought: Those "smooth twist" barrels really have revolutionized airgunning... Expand Thread - TC on Nov 20, 2009, 3:04 PM

Smooth Twist and Polygonal barrels are not the same thing according to Ben Taylor - Helder on Nov 20, 2009, 3:13 PM

I know - that's my point... - TC on Nov 20, 2009, 3:36 PM

they do exist, the rights are being sold to a firearms company though from what I was - Helder on Nov 20, 2009, 3:48 PM

Seems like I remember seeing a "progressive twist" - Brushy Bill on Nov 20, 2009, 4:42 PM

There is nothing new under the sun they say Bill ......... However that - Yrrah on Nov 20, 2009, 4:57 PM

I know what you mean, - Brushy Bill on Nov 20, 2009, 5:37 PM

All the early Colt single action pistols had this progressive, - L D on Nov 20, 2009, 6:49 PM

Paradox Rifeling - BSJ on Nov 20, 2009, 5:37 PM

but in this case - Helder on Nov 20, 2009, 5:45 PM

heh heh, what's next! "Scratch rifling"? nt - Russell Best on Nov 20, 2009, 8:09 PM

Dobson? - BSJ on Nov 21, 2009, 9:52 AM

Precision Airguns Expand Thread - Larry in Michigan on Nov 20, 2009, 2:37 PM

Re: Precision Airguns - ShootingStahr on Nov 20, 2009, 3:22 PM

you guys are lucky - tony on Nov 20, 2009, 5:48 PM

One of these days - Dirt Dawg on Nov 20, 2009, 6:06 PM

Re: Precision Airguns - Chris on Nov 20, 2009, 6:21 PM

Limited Edition Taylored Daystate Air Wolf(.20) - Who's down for one? Expand Thread - Tony on Nov 20, 2009, 2:22 PM

actually you might want to disregard that info I gave you yesterday.... - Helder on Nov 20, 2009, 2:28 PM

LOL, ok....nt - Tony on Nov 20, 2009, 2:31 PM

Excellent rumor control here... Y'all are efficient :) ...nt - Paul @san diego on Nov 20, 2009, 2:37 PM

LOL ! Thankfully in this case the rumour turned out to be correct! - Helder on Nov 20, 2009, 2:59 PM

Not me Tony ............. - Yrrah on Nov 20, 2009, 5:14 PM

I'd buy it - Dirt Dawg on Nov 20, 2009, 6:08 PM

Where did you get that JSB blue pellet holder - Raymond Pratt on Nov 20, 2009, 6:43 PM

It came from the JSB factory. However H & N ( others too perhaps ) - Yrrah on Nov 20, 2009, 7:13 PM

Great upgrade - Bobby Patterson on Nov 20, 2009, 10:26 PM

Can they be attached to other guns than the Air Wolf?? - The Verminator on Nov 21, 2009, 12:56 AM

Perhaps a Discovery??? nt - The Verminator on Nov 21, 2009, 12:58 AM

I think Crosman has started a PCP revolution in the US Expand Thread - David Enoch on Nov 20, 2009, 1:56 PM

Please don't forget the new Challenger, - Brushy Bill on Nov 20, 2009, 2:02 PM

i agree somwhat but - crowpopper on Nov 20, 2009, 2:06 PM

yes a pcp needs air, but the nice thing about - Brushy Bill on Nov 20, 2009, 2:27 PM

darkside is way man!!! - john on Nov 20, 2009, 3:01 PM

Don't say that too loud, Bill..... - Doug Owen on Nov 20, 2009, 8:25 PM

O well, let them think what they want, one man's trash - Brushy Bill on Nov 20, 2009, 9:50 PM

A frequently misunderstood effect of European products is.... - walter riddle on Nov 20, 2009, 2:40 PM

yo... - john on Nov 20, 2009, 3:03 PM

only partially accurate... - Jim on Nov 20, 2009, 3:23 PM

Not so sure about AF guns..... - Doug Owen on Nov 20, 2009, 8:32 PM

and hopefully, they'll put a shroud and mrod mag and trigger on their new pistol - anewguy on Nov 20, 2009, 4:05 PM

I don't know... - Jim on Nov 20, 2009, 4:36 PM

I mostly agree with Dave E..Scuba tanks suitable for 2500 psi fills - scot laughlin on Nov 20, 2009, 4:23 PM

Sorry, won't bite on the "conservative" line... - Jim on Nov 20, 2009, 5:07 PM

100+ ft lb airguns are a small part of the potential market - scot laughlin on Nov 20, 2009, 11:41 PM

Glad they did it. - Mike on Nov 20, 2009, 4:51 PM

Think Crosman could produce a rock-bottom Disco. under $200 - robert on Nov 20, 2009, 5:19 PM

If only Dive Shops were as numerous as Wal-Marts... - DoogieB on Nov 20, 2009, 5:58 PM

paint ball shops - 21grains on Nov 20, 2009, 6:30 PM

How many places in the US don't have a dive shop, paintball shop, or welding shop - scot laughlin on Nov 20, 2009, 11:44 PM

there NO dive shops near me - crowpopper on Nov 21, 2009, 3:14 AM

Any rumours of big holiday sales at online airgun websites ? Expand Thread - rumme on Nov 20, 2009, 1:22 PM

It seems in this day and age the "specials" are perpetual.. - VPilot on Nov 20, 2009, 1:37 PM

Glad to see you come back rumme, there are - Brushy Bill on Nov 20, 2009, 1:57 PM

Thanks....Ive been waiting for months to buy - rumme on Nov 20, 2009, 2:03 PM

mendoza - Russ Brown on Nov 20, 2009, 5:39 PM

Russ, you must have gotten a bad one then... - rumme on Nov 20, 2009, 7:50 PM

Rumme, check out the Air Venturi Halestorm. It's $449 @ PA. with the 10% discount $404. - Scott in Hawaii on Nov 20, 2009, 6:56 PM

Better watch out! - Dave Dunn on Nov 20, 2009, 10:56 PM

How come we don't see many AirFocre guns in FT matches? Expand Thread - John on Nov 20, 2009, 1:20 PM

I saw a post - FPoole on Nov 20, 2009, 1:36 PM

I asked this in the FT forum.. - Andre on Nov 20, 2009, 1:58 PM

Excellent info - Thank you. Trying to narrow down the list: Disco, AF on CO2 or M-Rod... - John on Nov 20, 2009, 3:43 PM

Disco and Talon - throggy on Nov 20, 2009, 4:18 PM

I was looking at the pellet loading area on the Disco - John on Nov 20, 2009, 4:23 PM

Can get a little more room... - robert on Nov 20, 2009, 6:34 PM

The Edge might change some minds and make this everyones sport as opposed to a rich guys - Randy on Nov 20, 2009, 6:32 PM

I don't think the Edge would have any "edge" over the - Brushy Bill on Nov 20, 2009, 8:20 PM

Ergonomics - Adam SoCal on Nov 20, 2009, 6:49 PM

Great point - right tool for the job - John on Nov 20, 2009, 6:57 PM

Has there been a study on FPS/FPE stats at certain distances ? Expand Thread - rumme on Nov 20, 2009, 1:17 PM

It would seem logical to me that - rumme on Nov 20, 2009, 1:20 PM

FPS/FPE info - Terry in LP on Nov 20, 2009, 1:34 PM

thanks.... - rumme on Nov 20, 2009, 1:41 PM

That is a wealth of information... - rumme on Nov 20, 2009, 1:53 PM

Talon , masking tape on the hammer spring WTH ? Expand Thread - Ron on Nov 20, 2009, 12:46 PM

It Was Airforce's Way Of Quieting The Spring Twang.They All Have It - Noodles on Nov 20, 2009, 12:59 PM

Any info on the Delrin spacers ? - Ron on Nov 20, 2009, 5:28 PM

No spacers in US guns - Doug Owen on Nov 20, 2009, 10:18 PM

Will a Sheridan 2-piece scope mount fit a Benjamin 347? Expand Thread - RedFeather on Nov 20, 2009, 12:37 PM

The mounts will fit.. - Jeff on Nov 20, 2009, 1:21 PM

Thanks - RedFeather on Nov 20, 2009, 1:49 PM

Mid 70s trigger a bit heavy but servicable - Bill S. on Nov 20, 2009, 5:41 PM

Update on tech force PCP... Expand Thread - rumme on Nov 20, 2009, 11:52 AM

Re: Update on tech force PCP... - FT91 on Nov 20, 2009, 12:07 PM

Should be a thorough review of the gun next week... - rumme on Nov 20, 2009, 12:15 PM

I picked up the prototypes today for a review...... - Randy Mitchell on Nov 20, 2009, 12:31 PM

what is your take on the QC from initial observations??.... - john on Nov 20, 2009, 12:41 PM

So far, so good..... - Randy Mitchell on Nov 20, 2009, 12:58 PM

Randy is it as laud as the Disco?-------------------nt - Willy on Nov 20, 2009, 8:12 PM

Pretty much......perhaps louder since it uses higher pressure...... - Randy Mitchell on Nov 20, 2009, 9:40 PM

I like it so far for price point..... - john on Nov 20, 2009, 12:36 PM

Re: Update on tech force PCP... - dmeadows on Nov 20, 2009, 1:37 PM

It seems the "take it or leave it" days of the $1000 PCP world may be coming to an end. - VPilot on Nov 20, 2009, 1:59 PM

I'm with Tim on this one...all it takes to bring PCP prices down is to take them out - scot laughlin on Nov 20, 2009, 4:35 PM

Hoi Polloi and proud of it... - robert on Nov 20, 2009, 7:42 PM

Opera fan?!... - ricdoug on Nov 21, 2009, 3:45 AM

HW Choked(.17) vs. LW Polygon Choked(.17) Barrel - Pellet Imprint PICS Expand Thread - Tony on Nov 20, 2009, 11:32 AM

Looks to me.... - Mike melick on Nov 20, 2009, 12:09 PM

Perhaps, we shall see what paper says at 50 yards in due time...nt - Tony on Nov 20, 2009, 2:09 PM

I'd like to see - Steve on Nov 20, 2009, 12:33 PM

We shall see, first things first... - Tony on Nov 20, 2009, 2:10 PM

here's my .177 barrel questions - chuck on Nov 20, 2009, 1:02 PM

Being the airgun enthusiast and not a builder/industry guru - Tony on Nov 20, 2009, 2:18 PM

Thanks for the report, Tony... - TC on Nov 20, 2009, 3:46 PM

You're welcome Todd! - Tony on Nov 20, 2009, 4:53 PM

A suggestion ............ - Yrrah on Nov 20, 2009, 4:40 PM

Thanks Harry! We need to get you situated with a Girlie Caliber(.17) - Tony on Nov 20, 2009, 4:56 PM

With those particular pellets Tony,... yes .... - Yrrah on Nov 20, 2009, 5:27 PM

I get perfect results - L D on Nov 20, 2009, 6:56 PM

As you know, I have used raw carded sheeps' fleece from - Yrrah on Nov 20, 2009, 7:29 PM

Is $145 shipped a good deal on the Mendoza RM2000 ? Expand Thread - rumme on Nov 20, 2009, 11:32 AM

The price sounds OK but you may want to read this - BBGun Bob on Nov 20, 2009, 11:42 AM

Good price for a repeater with scope... - Dave on Nov 20, 2009, 11:43 AM

Thanks for replies... - rumme on Nov 20, 2009, 11:49 AM

Mendoza pellets ??????Are these the pellets you mean - rumme on Nov 20, 2009, 11:57 AM

That same rifle costs almost TWICE as much in Mexico - JC on Nov 20, 2009, 11:56 AM

i thought mendoza was made in spain. mexico is not a - Larry Pirrone on Nov 20, 2009, 2:23 PM

Mendoza is most certainly a Mexican company! n/t - Bryan Klim on Nov 21, 2009, 10:06 AM

Do some searches - RedFeather on Nov 20, 2009, 4:26 PM

yes, it looks like ... - rumme on Nov 20, 2009, 10:21 PM

Anschutz 250 Main Spring & Seals Expand Thread - Donovan Taylor on Nov 20, 2009, 9:27 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Next >>

BAR/PSI Conversions FPE by Airhog number of fills by Airhog

Click On Banner

D I S C L A I M E R JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.

America's #1 Airgun Forum