Return to Index  

Some random gun pics...

July 5 2009 at 9:28 PM

  (Login rob3dr)
YFOT

Took these over the weekend while I had a bit of sunlight.

With my S400MPR FT with the Classic tube installed I got the following using 7.9gr pellets. Starting fill pressure 150Bar. Ending at 80 Bar.

Shot 1 --798fps
Shot 10--813
Shot 20--814
Shot 30--822
Shot 40--835
Shot 50--848
Shot 60--843
Shot 70--853
Shot 80--854
Shot 90--832
Shot 100-795

[linked image]


Since I have the S400C set up with the same tube, I was curious as to what a shot string from it would look like. The barrel is a bit shorter, and I have a heavier hammer spring in it so I must fill to 200bar on this gun.
7.9gr pellets 200 Bar fill down to 145 Bar

Shot 1--815fps
Shot 10-822
Shot 20-821
Shot 30-822
Shot 40-826
Shot 50-818
Shot 60-806

Interesting that while it was less shots, the spread was quite tight.

[linked image]
[linked image]


While I was at it, I shot a few others and took some pics. Unfortunately, I had the camera set to low resolution for the pics and so had to re-take pics today in between rain and cloud.

The Condor got a few shots run through it beastly gun this is.
[linked image]


Shot the R9 a few times, nothing of note.
[linked image]



Took out the HW30AW for a quick group.
[linked image]


As well as the R7.
[linked image]


I had been struggling with what scope to use on my DAQ Bandit. Ive had several on there, but no scope that I felt captured the essence of the gun in both aesthetics and functionality. I think I finally found one. I picked up this Japanese made Tasco when I was around 12 years old. I got it at a flea market for $10. I remember that it was $10 because I was a bit shocked at the price, but thought to myself Well, its a 10 power scope! and so I got it. Its a 10x40, fixed parallax at 100 yards. After a quick disassembly and re-parallaxing at 40 yards, it works a treat on the DAQ and looks great on it as well. The prior owner had a brake on it and so the muzzle is a bit barked up.

[linked image]


and while I had the big boy out, I also had to get a shot of the DAQ 308. As mentioned in prior rambles, Ive got this one turned down to 140fpe for about a dozen shots.
[linked image]

 
 Respond to this message   
Responses


 BAR/PSI Conversions    FPE by Airhog    number of fills by Airhog

Click On Banner


D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.