Return to Index  

Re: Yes you might be missing something...

May 16 2017 at 7:29 PM
peterdulux  (Login peterdulux)
YF12


Response to Yes you might be missing something...

Getting back to you guys. Mine is the older UK, two piece stock. No anti tamper.

Pressure was at about 1/3 full when I first turned out the restrictor screw. was up right at 700's.

Then filled it to around 180 bar, (no gauge), nitrogen with regulator set to 180 ish.

Then it dropped way down to low 500's. Then I turned the hammer spring in two turns and ended up at 600 when I stopped and called it a night.

Something else, I bought it with two air cylinders, original and an Avanti cylinder. With the Avanti cylinder, before playing with settings, it shot 30 fps faster than with the original AA cylinder.

Any ideas on that one?

And yes it is a nice little gun for sure. Oh, it's a ,22

O rings look ok.


    
This message has been edited by peterdulux on May 16, 2017 7:33 PM


 
 Respond to this message   
Responses


Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.