Return to Index  

Try holding the breech bushing in place when attaching the LDC...

May 18 2017 at 2:36 AM
H.E. Potter  (Login Hepotter)
YF12


Response to Mine may have a issue

Put a thin pencil, or a piece of wood dowel rod in the breech hole, then lift up a bit, to stop the breech bushing from rotating when screwing on the moderator.

One of the Youtube videos showed an owner drilling/threading two grub screws above the breech bushing to permanently hold it in place. Possibly taking the gun apart, cleaning the bushing, and applying some heavy duty loc-tite might be a simpler and reversible way to stop it from rotating when screwing the LDC onto the barrel. I'm not quite certain why that bushing needs to be able to rotate...it seems to serve no ready purpose.
Hepotter

 
 Respond to this message   
Responses

  • THanks!! - Ken on May 19, 2017, 9:41 AM
  •  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.