Return to Index  

Maybe you should measure the barrel ?

May 18 2017 at 10:59 PM  (Login Mrodair)

Response to Size difference Gen 1 and Gen 11

The old version, has a 2-1/2" air stripper or longer inside the shroud.

The new MK II, has a 1" or slightly less long barrel nut..

This, = longer barrel, without looking like Pinocchio.

To tighten the barrel nut properly, just use an 8mm x 1 bolt and nut. (Local hardware item)

Run the bolt into the barrel nut, use the nut as a jam nut an viola, as tight as you want.

Leave the base and end cap on the pistol and adjust the sound level and look, by adding sections to your liking.

Easy peasy.

If I would have waited another day or two, just to get bolts to send, my inbox would have exploded, so we got them out as soon as possible.

All, just like we advertised.

We hope you all enjoy the new AirMax MK II and hope to have more here soon.

There are a few left in stock, but not many and not for long.

More on the way, but will be about 6-8 weeks before they arrive.

ALOT more inbound, and I'll try to keep you posted as soon as I get more info.

Thanks Again Guys

We Are Mrodair

 Respond to this message   

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********

JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.