<< Previous Topic | Next Topic >>Return to Index  

CAREER 707 SPARES!!!!!

January 20 2007 at 3:14 PM
Maxine  (Login maxchch)

I need some spares for my career 707. Stored charged at 2000psi by 1 month without use and the valve oring lost its form. After umount it, i damaged a little the anodized black alu.

Contacted Tim, and he offer me some sumatra valves that fix the psi store issue. May be shortened for a correct fit.

The problem now is that nobody can supply the damaged anodized parts (two retaining rings, etc). I tried BAR (lloyd from Black Pool, Tim, Pyramid Air, straight shootes, ShingSung...). Chambersgunmakers have one retaining ring, but i need 2 and due the death of the original owner only can dispatch pieces in the present stock.

So...ANYONE KNOW WHERE CAN ORDER CAREER 707 SPARES?.

Thanks a lot and my apologies for my bad english, xD.


 
 Respond to this message   
AuthorReply

L.E. Hoggard
(Login TPlant2000)
YFOT

Order some...

January 20 2007, 9:04 PM 

Aluminum Black from Brownells. Unless you really buggered it good you should be able to touch it up and not have it look too bad. Here's a link.
http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=4941&title=ALUMINUM+BLACK

 
 Respond to this message   

Dutch
(Login Dutch.22)
YFOT

Gusto

January 20 2007, 11:01 PM 

go to gun broker or auction arms and find gusto.

This guy may have what you need.

Dutch

HeheheheHehehehHeehehehe

And aaain't it grrreaaat to be livinnn in the USA.

I never whacked a pigeon, starling, or sparrow that didn't deserve it!!!

1278 and countin....on pigeons..

 
 Respond to this message   
Scumbuster
(Login misteradvice)

I have the Career II 707 & Career III 300 and I have

January 21 2007, 3:51 AM 

always stored them filled, sometimes up to 3000 psi.
Why at 2000 psi would things go to hell?
From what I've read here you're supposed to store them full or partially so.
Am I missing something?

 
 Respond to this message   
miha
(Login miha_b)

i have a career ultra and a career 201 9 mm ...

January 22 2007, 3:53 AM 

and the seals on the intake valve went to "hell" after a couple of months as you would said
the guns were filled to about 3000 psi
now i got four pairs of spare seals , just in case they start leaking again


    
This message has been edited by miha_b on Jan 22, 2007 3:57 AM


 
 Respond to this message   
miha
(Login miha_b)

spare parts

January 22 2007, 4:29 AM 

try this site http://www.qsa-trading.nl/
they are importing shinsung rifles among others
it is best to call them or send them a fax, it takes long for them to respond to email

you can also try

http://www.targetmaster.nl/ , and send them a mail..

both are in the Netherlands

good luck ( i also had no luck with lloyd from Black Pool, Tim, Pyramid Air, ShingSung ), but Tim gave me some good advice

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Traj Plot by RC    Airgun Calculators    number of fills Calc    cc gun volumes    Add your Pic






D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.