<< Previous Topic | Next Topic >>Return to Index  

Rapid question?

July 5 2009 at 11:50 PM		Johnny  (Login johnnyi)
YC
Is it possible to boost a 12 fpe MFR up to 25'ish FPE gun?


 
 Respond to this message   
AuthorReply


(Login shootistinsocal)

Give Pomona Airguns a Call

July 6 2009, 12:13 AM 

He should be in on Tuesday. He works a lot with Rapids and does modify them.

Adam in SoCal
AKA WalkOnKing

http://www.talonairgun.com

 
 Respond to this message   

(Login dirtdawg2)
YF

Possible but

July 6 2009, 3:13 PM 

some hassles, you need to increase the prechamber w/washers and reset the regulator. Then change out the hammer spring...

Hardest part is setting the reg, you'll need pressure gauge and deadhead-give Joe Brancato call.

 
 Respond to this message   
Current Topic - Rapid question?
  << Previous Topic | Next Topic >>Return to Index  

 BAR/PSI Conversions    FPE by Airhog    number of fills by Airhog
Click On Banner

D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.