<< Previous Topic | Next Topic >>Return to Index  

Some help with springers please.

February 5 2012 at 11:18 PM
  (Login samheu94)
YF

As most of you know I sold off all of my PCP stuff except for the shoebox. I kept it just in case I ever want to get back into PCPs. I traded my leupold scope for a couple of nice springers. A pro sport in .22 walnut and a Beeman r1 in .20.

What springers are basically the same thing. Like the hw97k is similar to.......?

I would like to know what springers are similar to another in a different brand or even the same brand but a different model.

I am planning on adding maybe tx200 in .177 to complete my complete my collection. Think it's a good idea?

 
 Respond to this message   
AuthorReply

(Login LARRYPIRRONE1)
YF

i think the tx in .177 is a great rifle

February 5 2012, 11:27 PM 

and mechanically very similar to the pro sport. the ballance on the pro sport is more neutral where the TX is more front heavy. I own both and am mow shooting the Pro Sport in field target competition and i am very happy with it. I did put Anchuetz barrel weights on it to add some front weight bias.

I can't comment on the 97. I have only shot one once or twice. nice gun. No experience tih the R1.

 
 Respond to this message   

(Login Hearken)
YF

Good start...great choices

February 6 2012, 12:08 AM 

I think you need a TX in.177 and either a .177 HW50 or an R7 If u want a low to mid powered gun.

I find the TX to be a slightly easier gun to cock than the prosport and equally good off-hand.. The TX is.my favorite all round springer of any type...though the prosport is a slightly more elegant looking gun...and just as accurate.

The hw50 is accurate, powerful, easy to cock and is less hold sensitive than the R series Beemans I have owned. I love all the R series guns....but the longer I shoot, the more I appreciate the lower power models.

And mayyyybe you should cosider an FWB 300 or RWS 75....they are truly amazing guns...capable of extraordinary accuracy that stretches many times farther than their intended use. I have regularly shot sparrows with an FWB300 at 60 yards with cp lites.




 
 Respond to this message   

(Login Airgunmanart)
YF

Tell you what,,

February 6 2012, 2:06 AM 

a TX in .177 as just as good as a HW-97 .177. You tune the HW-97 and it will perform as good. BUT I have to agree with Larry P., the TX is a very simple rifle to work on as well as the Pro Sport. Darn good shooters. It's all in the man behind the gun. R-1's, I've had a few, I lean towards the .22, good hunting gun. My 2 cents.

 
 Respond to this message   
noreasta
(Login noreasta)
YF

There are the Diana's too....

February 6 2012, 8:11 AM 

I don't know if you're interested in some guns with a little more ft-lbs,
but there are the Diana M48/52 which is similar to the M54/56 action.

I'm sure you're aware of the sliding sledge system of the M54/56.

And it may even be possible to get the 54 in a "factory" .20cal LW barreled
custom gun through Hector Medina on the Dianawerks forum.

It should be able to be tuned to be super smooth and accurate.

 
 Respond to this message   

(Login Whiteleather)
YFOT

z

February 6 2012, 8:56 AM 

z


    
This message has been edited by Whiteleather on Mar 29, 2012 1:53 PM


 
 Respond to this message   
Current Topic - Some help with springers please.
  << Previous Topic | Next Topic >>Return to Index  

Traj Plot by RC    FPE    number of fills Calc    cc gun volumes    Add your Pic

******** Buy 3rd/4th gen FX Pumps for Superior quality and unbeatable 5 year factory Warranty.********



D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.