<< Previous Topic | Next Topic >>Return to Index  

AA 410 power wheel loose

May 16 2017 at 7:42 PM
peterdulux  (Login peterdulux)
YF12

I may be typing in the wrong query, but, I am trying to figure out how to get my AA s410 power adjusting wheel ( the one that seems to loosen for everyone) removed and adjusted. It moves and sometimes get stuck half way in the settings, like something is causing it to get stuck.

I read about the locking grub screw from the bottom end of the action and loosened it but I didn't come apart.

Any links, tutorials, pics vids?

I'm sure it's been asked and I did search, but my wording may be way off.

 
 Respond to this message   
AuthorReply
John in Ma
(Login jroh1)

you have to back the tension screw out all the way so the spring and pin come out as well.

May 16 2017, 9:13 PM 

That pins main purpose is to keep the power wheel located properly and for tension on the shaft.

 
 Respond to this message   

C. Jones
(Login limbshaker)
YF12

Here's some pics

May 16 2017, 10:00 PM 

http://www.network54.com/Forum/79537/thread/1373576403

Here's a post I made concerning the power wheel. Mostly on how to keep it from moving, but the pics may help you out.

 
 Respond to this message   
peterdulux
(Login peterdulux)
YF12

Re: Here's some pics

May 17 2017, 12:29 AM 

Thanks to both of you for you answers.

Pics do help and knowing that the set screw needs to come all the way out.

So it will just push out and there is a spring coming out with it? Spring and pin coming out with the set screw?

Perhaps the spring is what was/is causing the binding.


    
This message has been edited by peterdulux on May 17, 2017 12:30 AM


 
 Respond to this message   

db
(Login Diamondback)
YC

You might want to see these posts on S400 S410 power adjuster

May 17 2017, 5:07 AM 


Removing the action from the tube to get to the power adjuster grub screw:
http://www.network54.com/Forum/79537/message/1355772257/Paul

Power adjuster replacement oring sizes, why not to over tighten adjuster grub screw, & simple way to add an extra oring to prevent adjuster from moving while shooting by simply adding an extra oring & it’s size:
http://www.network54.com/Forum/79537/message/1343479886/Re-+QS+I+have+a+S-400+SL+that+is+blowing+air+up+in+my+face

Explanation of why over tightening power adjuster grub screw is bad:
http://www.network54.com/Forum/79537/message/1343530110/What+is+going+on+is%21%21


    
This message has been edited by Diamondback on May 17, 2017 5:08 AM


 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.