<< Previous Topic | Next Topic >>Return to Index  

USFT valve OAL length

June 15 2017 at 4:22 PM

Casey Robertson  (Login SDplinker)
YF12

Anybody have one to measure? Looking for overall length. If you can, would also like to confirm 2mm stem diameter.

Thanks
Casey

 
 Respond to this message   
AuthorReply
LD
(Login lhd)
AR&P

oal

June 15 2017, 8:39 PM 

varies. Older ones longer.

Why do you need this info?

 
 Respond to this message   

Casey Robertson
(Login SDplinker)
YF12

Going to try one in my Anschutz I've had stored away for a while

June 15 2017, 9:15 PM 

Current valve is kind of soft and I want more power. Tim's site mentions that people use/have used them in match guns so figured I check it out. The stem is 2mm whereas the Anschutz is 1.5mm. I planned to have the valve housing opened up anyway so the diameter shouldn't be an issue. Mainly curious how much more/less proud of the front of the housing that the stem will protrude.

Not exactly expensive at $10 a pop but figured I'd check first - just hadn't heard back from Tim yet.

-Casey

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.