Leaky LeshiyJune 18 2017 at 11:29 AM
|Rod (Login RCMann)|
Just replaced the regulator with a Huma unit. It regulates really well, but I'm also noticing that it only holds air for a few days then goes down to 0. The original Edgun regulator held air indefinitely, so not sure what the problem is. Will try with the original and see what happens but if there's any collective knowledge on what might be the issue I'd appreciate a hand.
I would clean the air tube and the reg seals
|June 18 2017, 7:26 PM |
My experience with slow leaks with regs is that "any" dust or debris that should not be there will cause a leak. I would disassemble the air tube again. Clean the air tube thoroughly as well as the reg seals. Put in some silicone spray and reassemble. Test.