<< Previous Topic | Next Topic >>Return to Index  

Prosport tune options

July 14 2017 at 9:12 PM
Josh3rd  (Login josh3rd)
YF12

Members I need your opinion, your experience and options of tunes that apply to Pro Sports. Basically I would love to get my prosport tuned or at least a good thorough through by someone who is very experienced and knowledgeable in that field. Now I do not want a 12 FPE prosport I would like to keep the same factory power or maybe just a little bit less or a little bit more but I want what Pro Sport owners have experienced or are experiencing now with a smooth shot cycle, repeatability of power and accuracy (so as long as I do my part). I would like to have the right lubes applied/used (krytok, I think that's how it's spelled) after market breach and piston seals from JM or vortek, as well as one of their springs or their kits.

So tell me what do you have, what are the pros and cons of the choices and so forth. I am just trying to see what is available and what route I should take and with whom

 
 Respond to this message   
AuthorReply

willy
(Login willy1)
YC

The only thing i would do is,pull it apart and shrink wrap the guide

July 14 2017, 11:13 PM 

to take the buzz out out it.The TX platform is pretty much at its max from the factory.

 
 Respond to this message   

db
(Login Diamondback)
YC

Not a Pro Sport, but my experience with a pair of TX 200's

July 15 2017, 5:58 AM 

My 177 TX200 was tuned by Billy Kizzy.

Much nicer firing cycle than my stock TX 200 in 22.

Some posts I made comparing the two:
http://www.network54.com/Forum/79537/message/1260311090
http://www.network54.com/Forum/79537/message/1345349417
http://www.network54.com/Forum/79537/message/1455160918

I'm not the only one who has been impressed by Billy Kizzy's TX 200 tuning, and these guys can shoot!
http://www.network54.com/Forum/79537/message/1272687892
http://www.network54.com/Forum/79537/message/1311449240

Perhaps Billy does Pro Sports too?

The last email I had for him was:
Bgk0808@yahoo.com

I have a phone number for him, from some time back. Email me if you would like to have it.


    
This message has been edited by Diamondback on Jul 15, 2017 6:08 AM


 
 Respond to this message   
Cliff
(Login c_m_shooter)
YF12

Re: Prosport tune options

July 15 2017, 7:53 PM 

If you want to keep the same power level, just look into a drop in guide and tophat from from tinbum over in the UK. I put his drop in kit with short stroke piston spacer in my TX200 and got a nice improvement. The short stroke dropped power from 16 ft lbs to about 13, but reduced recoil and hold sensitivity a lot. The guide quieted it down a lot. Does your rifle have any twang or spring noises now?

 
 Respond to this message   
Josh3rd
(Login josh3rd)
YF12

Yeah she does but

July 17 2017, 7:57 AM 

What I worry about as of now is that if I put a tune kit or replace it with JM or Vortek internals I will have to start over with everything meaning pellets election hold etc. And I think her accuracy is very reasonable now. So the debate I am having is should I mess with something that's not broken. Do you know what I mean?

 
 Respond to this message   
Cliff
(Login c_m_shooter)
YF12

Re: Yeah she does but

July 18 2017, 8:10 AM 

If it shoots acceptably, leave it alone. If the twang bothers you get a drop in kit. Mine liked 10 gr jsbs and 8.4 gr FTT at full power. Now it likes the AA 8.4 which should be the same as JSB 8.4, but this gun doesn't agree with.

 
 Respond to this message   

Scot Heath
(Login ish00ttrap)
YF

I tuned a few tx200s

July 16 2017, 8:44 AM 

And the best full power option I found was a stock spring shortened 2 turns, spaced almost stacked with a brass spacer in the piston end. A tight Delrin guide, be sure to true the piston rod, they can be way off center. Finally stone the trigger sear, I like the CD trigger way more than a Record. Very nice guns.

-Scot


    
This message has been edited by ish00ttrap on Jul 16, 2017 8:45 AM


 
 Respond to this message   
Josh3rd
(Login josh3rd)
YF12

I don't feel comfortable

July 17 2017, 8:00 AM 

Cutting my spring or any other type of work on the gun itself aside from a clean n relube or a drop in kit

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.