<< Previous Topic | Next Topic >>Return to Index  

Puncher Breaker .22.

August 5 2017 at 7:26 PM
MikefromMidland  (Select Login MScottLeeman)
YF12

Well,call me what You will...But I just took delivery of a PB. I've liked the look,watched/read reviews,read about the potential problems and hit the order button. First impression was not that bad,I wasn't expecting an FX or Air Arms for approximately 500.00. The trigger (to Me) sucked,so I went to work on it doing some adjustments and light buffing of components. MUCH better! Cleaned up the bore with some tight patches and JB Bore paste (no brass brush) followed up with some Ballistol until the patches were clean. I also LIGHTLY cleaned up the exterior of the action with some Wizards metal polish. This gave the dull blued components an awesome sheen! Then,after a couple days,I judiciously adjusted the hammer spring. As of now,I'm getting 31.4 ft lbs with JSB 18.1 Exacts. (883 fps) which is fine with me being I'm getting at Least 40 shots and still Well within the green on the gauge...which measures the same pressure as my Hill pump.

was told by the sales rep. that one of the reasons for the long wait (out of stock) was the manufacturer was addressing the reliability issues. Well,the cocking handle looks pretty much identical,not sure about the valve stem, although it doesn't appear to be showing any signs of wear/mushrooming,ect. If something breaks (pun intended) I'll be contacting Troy Hammer. For now,I'm gettin 3/8" 12 shot groups at 25 yds, enjoying Great shot counts and lovin life! Again,if something goes down the tube,I'll fix it with "More Stronger" parts. I'll keep you all posted as the story unfolds! Your Humble Correspondent, Mike.

 
 Respond to this message   
AuthorReply

Randy Stratman
(Login randy_68)
YC

Glad to hear

August 5 2017, 8:06 PM 

I looked at these this spring and then read all the bad reviews and some good ones. I still want one and may order one down the road. I don't mind a project gun as I can fix most things.
Any pics you can post?
For the first time in years I don't have a .22 airgun in my possession. Only have my RWS 52 .177 and a Cricket .25 bullpup. I miss having a .22 around.
Keep us posted on how thiings go with this gun.

 
 Respond to this message   
MikefromMidland
(Select Login MScottLeeman)
YF12

I sure will Randy!

August 6 2017, 11:27 AM 

I really need to take some time to figure out how to get pics up here. I think the rifle looks Fantastic with a little bit of work and elbow grease. Ended up sticking a UTG 4-16X44 SF on it with their medium size side wheel and it balances quite well. Added a one piece utg riser,the one with all the holes milled into it as I liked the look. Some of the reviews mentioned the little plastic Weaver rail having a tendency to pivot with one bolt attachment. I solved that by drilling and tapping the end of the rail with a 8-32x 1/2in socket set screw and drilling a corresponding hole in the stock. It's solid as can be now. Like You said,I like to work on things and fix issues/ shortcomings. Can't wait to get my paws on a QB Chief in .22 and spruce it up!

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.