<< Previous Topic | Next Topic >>Return to Index  

so recently my puncher breaker .25 has

August 8 2017 at 5:29 PM

beef75j  (Login beef75j)
YC

started blowing the cocking lever back with each shot. I checked bolt oring and it looks fine an in place...is there something more to this?
" If you live long enough smoking will kill you" Stop today!


44354.png

 
 Respond to this message   
AuthorReply

beef75j
(Login beef75j)
YC

upon further investigation it seem to be the...

August 8 2017, 5:48 PM 

hammer spring maybe because even when empty of air it pops it back...any suggestions on a fix?
" If you live long enough smoking will kill you" Stop today!


44354.png

 
 Respond to this message   
MikefromMidland
(Select Login MScottLeeman)
YF12

Can I ask how long You've owned it?

August 8 2017, 5:59 PM 

I Just picked up a PB in .22 and am curious as to how long it took for this problem to develop. I love the rifle and am capable of dealing with issues, should they arise. Thanks!

 
 Respond to this message   

beef75j
(Login beef75j)
YC

maybe a year now...I don't shoot it too much either

August 8 2017, 7:14 PM 

it just started doing it too.It's factory an no mods or adjustments made.
" If you live long enough smoking will kill you" Stop today!


44354.png

 
 Respond to this message   
Justin
(Login attentiontodetail)
YF12

early sign of lever failure

August 8 2017, 8:33 PM 

silentmatt makes a replacement cocking lever for the puncher breaker. the lever is made of pot metal and will bend in the middle. once it starts bending, it's only a matter of time before it breaks. I have one of silentmatts levers on mine and it is a huge improvement. amazing quality. google the name to find out how to buy since I'm not sure if I can post any links here. good luck and enjoy. hope this helps.

 
 Respond to this message   
MikefromMidland
(Select Login MScottLeeman)
YF12

Thanks Justin!! nt

August 8 2017, 10:55 PM 



    
This message has been edited by MScottLeeman on Aug 8, 2017 10:55 PM


 
 Respond to this message   

Steve LaPlace
(Login sjl6628)
YC

That's why it's called Puncher Breaker

August 11 2017, 11:06 AM 

I ordered a Puncher Breaker that came with a defective barrel. The original had visible chattering throughout the rifling most likely from a worn out barrel reamer. It grouped like a shotgun out of the box. The factory moderator clipped pellets even with the replacement barrel. It had to be drilled out to a larger diameter before it could be used. Puncher Breaker is the right name for these. Quality control is not a hallmark of this brand, IMO.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.