<< Previous Topic | Next Topic >>  

Anyone rebuilt a RAW HM 1000 regulator. Have been trying

January 31 2018 at 6:09 PM
Don Armstrong  (Login doninva1)
YF12

to get in touch with Martin but no joy. They are not answering their phone or replying to e-mails. I got the regulator out of the breech and watched a video, on youtube, that showed a rapid regulator. Supposed to be about the same as a RAW. Looks kind of simple but just guessing. I need the o-rings for the rebuild so anyone got a list? I don't have a regulator checked so I measured from the bottle end to the brass piece and from the nylock nut to the shaft. I recorded these. Will this get me close when re-assembling? Thanks for any help, Don

 
 Respond to this message   
AuthorReply
Paul in Zhills
(Login jps2486)
YF

Length dimensions should work-nt

January 31 2018, 7:35 PM 


 
 Respond to this message   
Don Armstrong
(Login doninva1)
YF12

If I can find a list of o-rings I will tear it apart. Going to give RAW

January 31 2018, 8:20 PM 

another try tomorrow. Don


    
This message has been edited by doninva1 on Jan 31, 2018 8:21 PM


 
 Respond to this message   
Tom Holland
(Login xbowsniper)
YF12

Re: Anyone rebuilt a RAW HM 1000 regulator. Have been trying

January 31 2018, 10:41 PM 

Don, give me your email, I have a couple of data rebuild sheets from RAW. They are a little dark, you might have to brighten them up a bit.

Tom Holland
Sniperxbow60x@aol.com
Assistant Match Director
Eastern Suffolk Competitive Airgunners Association (ESCAA)
Long Island NY escaaclub.com

 
 Respond to this message   
Tom Holland
(Login xbowsniper)
YF12

E mail sent, Don nt

February 1 2018, 2:09 PM 


 
 Respond to this message   
Jeff D
(Login jcdx25)
YC

He's been at the Shot Show...

February 1 2018, 8:54 AM 

I'm sure he'll have a backlog of calls to return, plus the 'merger' with AF is really starting to sound as if AF is taking over the operations and things will be moving to Texas. It's anybody's guess what that will do to his availability.


If you haven't been out there... sign up for the rapid 7 owners club (I think that's the right name). You're limited in searching and viewing attachments until you register (which is slow). I would have to believe that your question has been asked before...

Good luck

 
 Respond to this message   
Don Armstrong
(Login doninva1)
YF12

Thanks, Jeff, after reaizing they were at the show, I waited

February 1 2018, 12:28 PM 

till yesterday to try contacting again. I decided to give them a couple days to catch up but evidently thats not enough. Don

 
 Respond to this message   
Jeff D
(Login jcdx25)
YC

Won't help 100% but identifies many of the orings...

February 1 2018, 1:46 PM 

[linked image]

 
 Respond to this message   
Don Armstrong
(Login doninva1)
YF12

Thanks, my regulator has the " V quick fill" system but should be

February 1 2018, 3:47 PM 

about the same. I tried calling RAW again today. They still have their message up, that they are at the show. Don

 
 Respond to this message   
Don Armstrong
(Login doninva1)
YF12

RAW got back to me, on a Saturday! They sent me a service

February 3 2018, 8:13 PM 

instruction on how to rebuild my regulator. Can't find the o-ring kit that came with my gun so I ordered a kit and some other spare parts. Don

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>  

Airgun Calculators    Num of fills calc    Capacity Calc

******** Kalibrgun High quality, superb Accuracy, outstanding Value. ********





D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.