For when it HAS to sell...
Include your email address, price, Caliber, make and model.
 Return to Index  

Tether your rifle and get Hundreds toThousands of shots, without re-filling your rifle!!!

August 10 2017 at 11:59 PM

ExpertHPA.com 714-907-0067 8AM-4PM Pacific  (Login n6yyo)
YC


Response to Carette 4500 PSI Compressor only $1299 with Auto-Shutoff


Tether your rifle and get Hundreds or Thousands of shots, without re-filling your rifle with our
REGULATED HOSE ASSEMBLIES

Normally $539, Special YF Discount for $489
http://experthpa.com/cart/cart.php?m=product_list&c=54






Regulated Hose Assemblies. Available for SCUBA, SCBA, Nitrogen, etc. Useful for filling airguns from a 6000 PSI tank, or if you wish to shoot your rifle from a bench while tethered to your air tank so that you have a constant fill pressure (great for big bore rifles too!). Also fill your smaller air tank from a large 6000 PSI tank. Many other uses too! Comes standard with Air Filled gauges (Left), shown with optional Glycerin-Filled Gauges(Middle) Note: I sell the gauges at cost if you go for this option, its just too nice a set-up not to get them.
[linked image]regulator2.jpg



MICROBORE AIR HOSES $39 Fit Air Pumps, Hose Assemblies, etc.
I have 1, 2, and 3 foot air hoses in stock for only $39 plus $6 ship, and 5 Ft (slight additional) (BUT YOU MUST MENTION THE FORUM). These come with 1/4" or 1/8" NPT or BSPP, NO ADAPTERS NEEDED, so you waste less air.

Rated at +6000 PSI and only 0.070" diameter with strain relief at each end. These hoses are so small in diameter that compared to the one foot of ¼” paintball hose, you could use 12 feet of this hose and still save air!

I also have replacement hoses for the short hose found on the Korean tanks. With my hose, you can eliminate some of the extra adapters that waste air and have a cleaner look too.

(Left) Get my 10,000 PSI Microbore Hose, with “The Works” optional STAINLESS STEEL Hand-Tight DIN300 Male on one end, and Foster Female Quick Disconnect on other end for use with many carbon fiber tanks. (Right) Shown with optional Female Quick Disconnect
[linked image]> [linked image]


REDUCED: Air Hose & Extensions with Stainless Steel Male and Female Quick Disconnects.


Note: I ordered a huge amount of Stainless Steel fittings, and so I am offering almost a $40 discount on my Air Hose Extension with Stainless Steel Male and Female ("Foster" type) Quick Disconnects. Normally these would be $107, I am offering these for $69 plus $6 shipping.

This is 3 Foot long with Stainless Steel Female and Male "Foster" type quick disconnects on either end as seen here. (Most popular is the 3 foot hose, but other sizes available). Also available with other types of connectors as well, please email or call for more information. Note: This picture is outdated. I have upgraded from this older gray hose which had brass ends that would break or shear off. I have since gone to my black hoses with STEEL ENDS that are rated to a higher pressure of 10,000 PSI.
[linked image]





If you prefer to fill your tank at a SCUBA shop that doesn't have an SCBA adapter, we have that adapter. If you want to fill it at a place that fills paintball tanks, we have that adapter too. We have all kinds of adapter and fittings, so please check out our website athttp://www/AirTanksForSale.com



Note: All adapters are described from left side to right.







[linked image] DIN300 (SCUBA) to Hand Tight Stainless Steel SCBA Fitting. For filling SCBA tanks at a SCUBA Dive Shop. $89



[linked image] Yoke (SCUBA) to Hand Tight Stainless Steel SCBA Fitting. $89



[linked image]Stainless Steel Male Paintball (Foster type) to Hand Tight Stainless Steel SCBA Fitting. For filling SCBA tanks at places that fill paintball tanks $79.



[linked image] Fire House to DIN300 Adapter = STAINLESS STEEL Firehouse-Male SCBA-CGA347 Fitting to Hand Tight STAINLESS STEEL SCUBA Male DIN300 (SCUBA). Not cheap chrome plated brass that gets damaged threads and becomes useless/. Good for two uses. 1) For using my high quality hoses with a SCUBA tank, or 2) for filling SCUBA tanks at a fire house. Note: These are NOT chrome –plated brass fittings, nor do they require a wrench. Just hand-tighten onto your tank and you are ready to go.



[linked image]Stainless Steel Male Paintball to Male Paintball Fitting.



IMG_1875_small.jpgStainless Steel 1/8" Male NPT to Male Paintball Quick Disconnect (Left)
Stainless Steel Female Paintball Quick Disconnect to 1/8" female NPT(right) $39 for the mated pair in Stainless Steel .



IMG_1875_small.jpgStainless Steel 1/8" Male NPT to Male Paintball Quick Disconnect (Left)
Stainless Steel Female Paintball Quick Disconnect to 1/8" female NPT(right) $39 for the mated pair in Stainless Steel .


IMG_2703_small.JPGStainless Steel Female Paintball Quick Disconnect to 1/8" Female NPT. All one piece, MADE IN USA, not Asian knock-offs


IMG_2702_small.JPGStainless Steel Female Paintball Quick Disconnect to 1/8" Male NPT



IMG_2699_small.JPGStainless Steel Male Paintball Quick Disconnect to 1/8" Male NPT $19.




[linked image]Male Paintball Quick Disconnect to 1/8" Female NPT $19.



IMG_4413crop_small.JPGDead Head (No, Not the Jerry Garcia type, the kind you put on the end of a SCUBA tank's hose to determine your remaining tank pressure). Now in Stainless Steel instead of brass $19



[linked image][linked image]
(LEFT) 2.5" Stainless Steel , Glycerin-filled Gauge with PSI & BAR readout and 1/4" NPT $39. Also available for Hill Pumps etc., only $49 Fit other Airtanks, like the Korean, etc. for $69. This gauge is made in America, as is most of my product.

(RIGHT) READ THE PRESSURE OF YOUR SCUBA or SCBA TANK WITH THIS GAUGE. If you would like an accurate gauge, that reads in BAR and PSI to easily measure the pressure inside your airtank, this is it. Just connect the male "Paintball/Foster" type Male Quick Disconnect to your air hose, and that's it! Only $59.



[linked image][linked image] 1" (23mm) High Quality Metal Gauge with BAR readout. Excellent replacement for most air guns, air tanks, etc. These are very nice gauges, not like paintball stuff.
Available in 1/8" BSPP back mount $35



[linked image]

PROBE ADAPTERS



<span class=www.airtanksforsale.com/sseighthfoster_small.jpg " alt="[linked image]"> Dowdy Seal with Stainless Steel 1/8" Female BSPP to Male Quick Disconnect (Fits FX, newer Air Arms, EdGun, etc.)



IMG_1404_small.JPG Steel 1/4" Female BSPP to Stainless Steel Male Quick Disconnect, seals with Delrin insert (Fits Condor/Talon, etc.). Air Force Condor/Talon bottle to Stainless Steel Male Quick Disconnect Adapter. Available as shown as complete adapter to fill an Air Force bottle from either your pump, air tank or any hose that has a Female Quick Disconnect, or I have just the proper male quick disconnects if you already have the Condor Adapter.


[linked image] One Pieces DIN200 to Male Paintball Quick Disconnect (Fits Steyr, Feinwerkbau, etc.) $39







Theoben Rapid Quick Fills

I am advertising 2 kinds of quick fills.

The first is an in-stock quick fill for Theoben Rapids. No longer will you need to unscrew the bottle one turn, burp the action for a few shots, remove the bottle, find then get a wrench for your bottle adapter, fill the bottle, and screw the bottle back on the rifle. Now, with this in-stock fill all you need to do is hook up the female quick disconnect to your hose directly to this male on the rifle. These are great!

Just screw this into the bottom of your Theoben Rapid and then you can just attach the Female Quick Disconnect of your hose directly to your Rapid! In addition, you won’t lose the air it takes to re-pressurize the action when re-installing the bottle. (This picture is outdated. Adapter is now steel, and Male Quick Disconnect is upgraded to Stainless Steel Male, so it won’t wear out. Everything you need, Dowdy Seal, Threaded Fitting and Male Quick Disconnect is included $59



[linked image][linked image]

In addition, I also have the female connector for Allen Z Bottle quick disconnect he mounts on Rapids, Feinwerkbau, Steyr, etc., as well as the older Air Arms S300, S310, S400, S410 that use the "air chuck" instead of the banjo type (picture below is worth a 1000 words). Only $35



[linked image][linked image]





To receive notifications of the latest Airgun and How-To videos, and discounts and updates on my products, please "Like" my FaceBook page at
https://www.facebook.com/AirTanksForSale


Joe Brancato 714-907-0067

For AirTanks, Custom Hoses, Fittings, Gauges, etc.
please click here http://www.AirTanksForSale.com

[linked image][linked image]

 
 Respond to this message   



BKL MOUNTS - SECOND TO NONE.




James Kitching Memorial Page

D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from buying or selling products posted on this page, as they are the exclusive responsibility of two parties: the person who sold and the person who bought posted items.JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.