For when it HAS to sell...
Include your email address, price, Caliber, make and model.
 Return to Index  

Swap your SCBA or DIN300 that flow TOO FAST to SAFER TJ3 SLO VALVE w/2 Gauges and QD Hose

August 11 2017 at 12:00 AM

ExpertHPA.com 714-907-0067 8AM-4PM Pacific  (Login n6yyo)
YC


Response to Carette 4500 PSI Compressor only $1299 with Auto-Shutoff


Swap your SCBA/DIN300 that flow TOO FAST to SAFER TJ3 SLO VALVE. This includes BRAND NEW TJ3 SLO-FLO Valve w/2 GAUGES (main gauge shows pressure going into your PCP Airgun, second gauge shows pressure remaining in your carbon fiber tank), 40” MICRO-BORE HOSE with stainless steel strain relief AND stainless steel Foster Female QD at BOTH ends, DIN300 Adapter with Male Foster QD, for only $229.


681.jpgValveCompare2.jpg2ndGauge.jpgFQD-Hose-Guppy.jpg




Can be filled at SCUBA Shops and Paintball Stores!

More information here: http://experthpa.com/cart/cart.php?m=product_list&c=48





We carry almost every brand of rifle and accessory and can ship most items within one business day (usually the same day, depending on time of day you call). See pictures and descriptions of rifles further down



Swap SCBA / DIN300 to a SAFER GREAT WHITE TJ3 Slo-FLo VALVE w/2 GAUGES MIRCRO-BORE HOSE, FQD

Upgrade to GREAT WHITE SLO VALVE w/2 GAUGES MICRO-BORE HOSE from Valves that flow TOO FAST

Does your valve have a tiny gauge, leak, or fill your Airgun too fast? Upgrade to the same High Quality TJ3 valve as used on my Great White, Tiger Shark and Guppy


[linked image]

Picture of my TJ3 Valve with Large Stainless Steel Glycerin-Filled Gauge and patent pending second gauge on left, other brand on right.

[linked image]

I've had customers call and say how they over-filled and damaged their Rifles while filling from one of those "Economy" DIN300/SCBA Valves that flows WAY TOO FAST!!! (valves that are made for breathing). Breathing (either the "Economy" DIN300 or the SCBA) valves are made to flow LOTS of air quickly for breathing, NOT slowly filling airguns. Blown burst discs, gauges that read 500PSI when the rifle is empty, etc. are just some of the issues resulting from over-filling their rifle. Replace that valve with the same High Quality TJ3 valve as used on my Great White, Tiger Shark and Guppy. It has a one-way restrictor for quickly filling the carbon fiber tank at your SCUBA Shop, while also allowing you to slooowly fill your Airgun for much safer filling.


Comes standard with 2.5" Large Stainless Steel Glycerin-Filled Gauge for determining the fill pressure into the gun. No multiple adapters needed to lean back the gauge that allow the gauge to snap off.


Does your tank have only one gauge?

Also available with patent pending second gauge that constantly shows the pressure inside the carbon fiber tank


My valves come in 2 different sizes, so they fit all 4500 PSI carbon fiber or paintball tanks.

Shown here with optional 2nd Gauge and Option 2A.

2A = Female Quick Disconnect on each end of hose and Male Quick Disconnect on Wrench-tight DIN300.

For a limited time, we are offering the Option 1 (Second Gauge) and Option 2A (Hose with FQD on each end, and DIN300 with MQD) FOR FREE!!!!!

When ordering the TJ3, YOU MUST MENTION THE YELLOW FORUM TO GET BOTH THE 2nd GAUGE AND OPTION 2A FOR FREE
This offer expires one week from today and is only for the TJ3 Valve, not our tanks!

[linked image]




We will try to meet or beat any price, just call and let us know.
WE HAVE MOST EVERY AIRGUN IN STOCK, READY TO SHIP
Bottom line, we are a STOCKING dealer.

Most rifles will ship within 24 hours.

For a larger list of what we carry in stock, please click here:

http://experthpa.com/cart/cart.php?m=product_list&c=27


Stop by our Southern California Store and see the real deal.





AirArms (All Models) Here is a sample of the S510

Air Arms S510 Poplar $1099


Air-Arms-S510-Extra-SL-Fac-177-Ambi-PoplAir-Arms-S510-Extra-SL-Fac-Ambi-Poplar.j




Rapid Air Weapons: Most models in stock. All calibers including 25, 30 and 357 as well.
RAW HM1000 w/Sporter Stock $1725
RAW HM1000 w/Thumbhole Stock $1799
RAW HM1000X w/Sporter Stock $1999
RAW HM1000X w/ThumbholeStock $2075
RAW BM500LW $2175
RAW BM500 MKII $2199.95


HM1000xWalnut.jpgHM1000xLam.jpg
BM500.jpgBM500-poplar.jpg






Kalibr, Crickets, Rifles, etc. ALL Caliber. Available in Wood, Synthetic, .177, .22, .25, 357 (9mm) Calibers
.177 Kalibr Cricket Bullpup, Synthetic or Wood Stock, only $1364.96
.22. Kalibr Cricket Bullpup, Synthetic stock, only $1364.96.
.22 Kalibr Cricket Bullpup, Wood Stock, only $1539.95
.25 Kalibr Cricket Bullpup, Synthetic stock, only $1395.95
.25 Kalibr Cricket Bullpup, Wood Stock, only $1589.95
.35/9mm Kalibr Cricket Bullpup, Wood Stock, only $1621.95
.22 Kalibr Carbine, Wood Stock, only $1561.95



KalibrCricketBlack.jpg
CricketWood.jpg
Cricket9mm.jpg
CricketWood.jpg






Taipan MUTANTS. One of the nicest Bullpups made; Available in standard and compact, with Brown and Block Stocks only $1399.

MutantsX900x500.jpgMutantsX900x500-B.jpg




Marauders; An excellent PCP Airgun for the Entry level and Experienced Shooter. Only $499 with HDD (more shots, less noise)

Marauder.jpgMarauderOblique.jpg




AirForce Texans; EVERYTHING's bigger in TX, and the Texan is the perfect example.

[linked image]

Air Force Talon $579.95
Air Force Condor $706.95
Air Force Texan $999.95









Vulcans; Live Long and Prosper with the Vulcan. This side-cocking rifle is a dream to shoot.
.22 Cal Vulcans Bullpup and Tactical Rifles are only $1549 (we will beat any advertised price)
.25 Cal Bullpup and Tactical Rifles Vulcans only $1549 (we will beat any advertised price)
This is the Vulcan Bullpup

Vulcan2.jpgVulcanGoodies.jpg



This is the Vulcan Tactical Rifle (It is a semi-bullpup and is shorter than the FX Bullpup) We also include a case, at no extra charge.

1837.jpg



Extreme Big Bore Air Rifles, from .257 to .72 Cal only $1699

727.jpg


Stop by and see us in Huntington Beach California (near the 405 and 22 Fwy). Call for directions.











We GAURANTEE BEST QUALITY 4500 PSI CARBON FIBER TANKS, GAUGES and HOSES for PCP AirGuns!!!

I GUARANTEE to have the best tanks, so why pay more?

97 Cu Ft/550 Cu in Great White Starting at $679 (Top)
72 Cu Ft/410 Cu In Tiger Shark Starting at $589
18 Cu Ft/114 Cu In Guppy starting at $389


[linked image][linked image]


All my tanks are made in the USA (not Asia like others). My goal is to keep Americans employed at any cost, (not become #1 in volume, or drive others out of business). Sure, I could make a lot more profit by selling an Asian tank, but there's more to life than just profit.

All my Great White and Tiger Shark tanks come with OUR LARGE 2.5" EASY TO READ Glycerin-Filled Gauge. Compare my 2.5" gauge on the right next to their 2” Red on Black Gauge on left.

1) +50% larger Dial area and easier to read

2) Our Main dial has easier to read Black on White 100 PSI increments and Red on White for BAR vs a difficult to read Red on Black BAR on Main outer and PSI Scale with 200 PSI increments.

GaugeCompare.jpg

3) We offer a Slo-Flo restrictor INSIDE our valve, so the pressure on our large 2.5” Gauge is truly what is being put into your airgun. When (and if) the other offers a restrictor, the restrictor is downstream in the DIN300 output fitting of hose. This acts like a partial “Deadhead” and makes their gauge show a higher pressure than what is actually in the hose.

4) On the opposite side of the valve we offer a Patent Pending second gauge that shows the pressure remaining inside our airtanks. No need to guess how much air is remaining, or run out of air at an inopportune time.

[linked image]

5) All my tanks come standard with a 40” micro-bore hose with only 0.070” ID and strain relief at both ends (never had one break, in thousands of hoses sold)

6) All our hoses are RATED THE HIGHEST PRESSURE!!! OVER 9,100 PSI WORKING PRESSURE Nobody beats our pressure rating, with our without strain relief.

All our tanks come standard with a STAINLESS STEEL USA Made Foster Brand Female Quick Disconnect.

7) Every single tank is hydro-tested in the USA to 7,500 PSIand some (samples only, not sold) are tested to withstand 15,500 PSI to ensure integrity.

I sell our tanks for the same price as the Asian tanks. So like I always say "Why pay more for less"?


For more information, please call 714-907-0067 or visit

http://www.AirTanksForSale.com/







We also offer a fine line of Regulated and Un-Regulated Hose Assemblies for various types of tanks


BEST PRICES AND QUALITY ON SCBA, DIN300 & CHARGING VALVE$, HOSES, REGULATORS HOSE, GAUGES

SALE!! Nitrogen/SCBA/DIN300 Regulators to Fill/Tether Rifle & Shoot 1000's between refills

Guaranteed BEST Quality & BEST Price. We are the INNOVATOR, not the IMITATOR.

PRICE MATCHING GUARANTEE. WE WILL MATCH ANY COMPETITOR'S PRICE ON AIRTANKS, FITTINGS. etc. AND GUARANTEE BETTER QUALITY! GUARANTEED UNBEATEN PRICE for a BETTER PRODUCT!

Just call 714-907-0067 8AM-8PM Pacific and let's talk




NOTE: All my hoses are rated almost 10,000 PSI Working pressure and use STEEL, not brass ends that have been known to break off.

Regulators not only allow one to fill an airgun more safely, but also allow tethering, with means you can shoot 1000’s of shots without refilling your airgun. Lately I have been making these dual purpose regulators for Nitrogen Air Hose Assemblies and also for use with my Air Tanks.

Buy any of my Air Hose Assemblies (Just a few of the types I offer are shown below SCBA, DIN300, Yoke, Nitrogen)) and buy a regulator for only $299. You will probably need to buy a gauge to go on it for $39 extra (depends on what kind of assembly you buy to put it on). Fill your tank more safely, or shoot your airgun on the tether and get thousands of shots without refilling from a Great White or SCBA tank.

For orders or information, please EMAIL OR CALL 714-907-0067 from 8AM-8PM Pacific



scbaassy_small.jpgdin300assy_small.jpgIMG_7702_small.JPGnitroassy_small.jpg

shoebox1_small.jpgdin300regulated.jpg



NOTE: Not all prices are adjusted to show Forum Reader Discounts. If you read it on the Yellow, make sure you mention it when you call me or send an email. Note: I Call between 8AM-8PM Pacific (Except Sun Morning, call after 1PM )



More information below:



AIR HOSES, FITTINGS, ADAPTERS for SCUBA DIN300 or YOKE, SCBA, Shoebox Compressor, Nitrogen

PLEASE DO NOT CLUTTER THE CLASSIFIEDS VIA A REPLY TO THIS POST! Please EMAIL

Thank you, Joe


My tank valve fittings are quality stainless steel hand-tight fittings, (no tools necessary to remove) gauges are stainless steel and liquid filled and read in both PSI and BAR, the bleeders are high quality stainless steel with a large thumb wheel to bleed. All hoses are microbore, and are the only type sold with a strain relief and steel fittings at each end. The hose is 3 foot long and only 0.070" in diameter for minimal air waste and are rated +6,000 PSI Working pressure and +20,000 PSI burst. The hose terminates in a Foster type female quick disconnect (fits Daystate, Crosman, etc.) Everything is top notch and I have over 100 feedbacks (all positive) on the BOI.





HOSE ASSEMBLIES





[linked image]Fireman tank/SCBA HOSE ASSEMBLY

Highest Quality Stainless Steel Hand Tight SCBA fitting, Stainless Steel Bleeder, Stainless Steel Glycerin Filled Gauge with BAR & PSI Scales and Micro-bore hose that is only 0.070 inch ID. Each end of the microbore hose has a strain relief to help eliminate damage at each end. Includes a Stainless Steel "Foster" type female quick fill on the end. = $159 Rated to 6900 PSI.




[linked image]DIN300 SCUBA HOSE ASSEMBLY

Same as above with high quality hose rated at +6900 PSI, stainless steel Hand Tight DIN300 fitting, stainless steel female quick disconnect and stainless steel bleeder, Stainless Steel Glycerin Filled Gauge with BAR & PSI Scales, and microbore hose with strain relief at each end as our SCBA Hose Assembly, etc., but made for use with DIN300 SCUBA tanks (Rated +4500 PSI) or other type of Carbon Fiber air tanks (not fireman type). This is a great replacement for hose those who currently have a 4500 PSI SCUBA tank. $159 + $14.50 shipped priority mail and insured.





[linked image]SCUBA YOKE HOSE ASSEMBLY

Same as above with high quality hose, stainless steel disconnects and bleeder, Glycerin Filled Gauge that reads both PSI and BAR, and microbore hose with strain relief at each end, etc., but made for use with SCUBA tanks with SCUBA Yoke/Block.

Note: Most SCUBA tanks and Yoke are only rated to 3000 PSI. This is the heaviest duty Yoke made and is the ONLY one rated to 4000 PSI. It is extremely sturdy (The nicest I've seen).

Normally $169,only $139 (no tank purchase necessary).


[linked image]6000PSI Nitrogen HOSE ASSEMBLY

HAVING TROUBLE FINDING A SOURCE OF 4500 PSI AIR FILLS?

NITROGEN HOSE ASSEMBLIES MADE IN USA! Nitrogen tanks are readily available at most welding supply shops and they are cheap to rent! Also, they are 6000 PSI, so you get an amazing amount of fills. If you wish to fill your Carbon Fiber tank or air gun from a large Nitrogen tank, this is it. STAINLESS STEEL tank fitting, STAINLESS STEEL Glycerin Filled Gauge that reads BAR & PSI, Highest Quality STAINLESS STEEL Bleeder with easy to turn knob and 40" x 0.070 inch ID micro-bore hose with strain relief at each end and STAINLESS STEEL "Foster" type quick fill = $169 + $14.50 shipped priority mail and insured.



[linked image] OWN A SHOEBOX COMPRESSOR? Want to fill your tank with the best setup available? Connect your Shoebox compressor to your airtank easily and safely with this setup.

A very High Quality Bleeder, BAR/PSI Scale Liquid-Filled Gauge, 3 Ft MicroBore Hose with Stainless Steel Female Quick Disconnects on each end. All this for only $139





SCUBA, SCBA, Nitrogen and other Hose Assemblies are also available as a Cascade systemfor 2 or more tanks. See my website for more information on custom hoses, etc. Two 44 Cu Ft tanks can actually be better than one 88 Cu Ft tank when cascaded together with this system. SCBA shown on Left, SCUBA Yoke on right (also available in DIN300, and other fittings). Can also mix a SCUBA tank to bulk fill the airgun, and an SCBA to top it off or any other combination you want. Made in such a way that you can cascade 2 tanks for home use, or use just one tank (such as if you are going in the field). Typically add $110 to most of the Air Hose Assemblies that are priced above.

[linked image]IMG_3008-2_small.JPG




Regulated Hose Assemblies. Available for SCUBA, SCBA, Nitrogen, etc. Useful for filling airguns from a 6000 PSI tank, or if you wish to shoot your rifle from a bench while tethered to your air tank so that you have a constant fill pressure (great for big bore rifles too!). Also fill your smaller air tank from a large 6000 PSI tank. Many other uses too! Comes standard with Air Filled gauges (Left), shown with optional Glycerin-Filled Gauges(Middle) Note: I sell the gauges at cost if you go for this option, its just too nice a set-up not to get them. Normaly $529, now on sale for $489.

IMG_6529_small.JPG[linked image]regulator2.jpg



MICROBORE AIR HOSES $39 Fit Air Pumps, Hose Assemblies, etc.

I have 1, 2, and 3 foot air hoses in stock for only $39 plus $6 ship, and 5 Ft (slight additional) (BUT YOU MUST MENTION THE FORUM). These come with 1/4" or 1/8" NPT or BSPP, NO ADAPTERS NEEDED, so you waste less air.

Rated at +6000 PSI and only 0.070" diameter with strain relief at each end. These hoses are so small in diameter, that compared to the one foot of ¼” paintball hose, you could use 12 feet of this hose and still save air!


I also have replacement hoses for the short hose found on the Korean tanks. With my hose, you can eliminate some of the extra adapters that waste air and have a cleaner look too.

(Left) 10,000 PSI Microbore Hose, with “The Works” optional STAINLESS STEEL Hand-Tight DIN300 Male on one end, and Foster Female Quick Disconnect on other end for use with many carbon fiber tanks only $129
(Right) Microbore with optional Stainless Steel Foster Female Quick Disconnect only $78

[linked image]> [linked image]



REDUCED: Air Hose & Extensions with Stainless Steel Male and Female Quick Disconnects.


Note: I ordered a huge amount of Stainless Steel fittings, and so I am offering almost a $40 discount on my Air Hose Extension with Stainless Steel Male and Female ("Foster" type) Quick Disconnects. Normally these would be $107, I am offering these for $69 plus $6 shipping.

This is 3 Foot long with Stainless Steel Female and Male "Foster" type quick disconnects on either end as seen here. (Most popular is the 3 foot hose, but other sizes available). Also available with other types of connectors as well, please email or call for more information. Note: This picture is outdated. I have upgraded from this older gray hose which had brass ends that would break or shear off. I have since gone to my black hoses with STEEL ENDS that are rated to a higher pressure of 10,000 PSI.

[linked image]





If you prefer to fill your tank at a SCUBA shop that doesn't have an SCBA adapter, we have that adapter. If you want to fill it at a place that fills paintball tanks, we have that adapter too. We have all kinds of adapter and fittings, so please check out our website ahttp://www/AirTanksForSale.com




Note: All adapters are described from left side to right.










[linked image] DIN300 (SCUBA) to Hand Tight Stainless Steel SCBA Fitting. For filling SCBA tanks at a SCUBA Dive Shop. $89




[linked image] Yoke (SCUBA) to Hand Tight Stainless Steel SCBA Fitting. $89




[linked image] Stainless Steel Male Paintball (Foster type) to Hand Tight Stainless Steel SCBA Fitting. For filling SCBA tanks at places that fill paintball tanks $79.




[linked image] Fire House to DIN300 Adapter = STAINLESS STEEL Firehouse-Male SCBA-CGA347 Fitting to Hand Tight STAINLESS STEEL SCUBA Male DIN300 (SCUBA). Not cheap chrome plated brass that gets damaged threads and becomes useless/. Good for two uses. 1) For using my high quality hoses with a SCUBA tank, or 2) for filling SCUBA tanks at a fire house. Note: These are NOT chrome –plated brass fittings, nor do they require a wrench. Just hand-tighten onto your tank and you are ready to go.




[linked image] Stainless Steel Male Paintball to Male Paintball Fitting.




IMG_1875_small.jpgStainless Steel 1/8" Male NPT to Male Paintball Quick Disconnect (Left)

Stainless Steel Female Paintball Quick Disconnect to 1/8" female NPT(right) $39 for the mated pair in Stainless Steel.




IMG_1875_small.jpgStainless Steel 1/8" Male NPT to Male Paintball Quick Disconnect (Left)

Stainless Steel Female Paintball Quick Disconnect to 1/8" female NPT(right) $39 for the mated pair in Stainless Steel.



IMG_2703_small.JPGStainless Steel Female Paintball Quick Disconnect to 1/8" Female NPT. All one piece, MADE IN USA, not Asian knock-offs



IMG_2702_small.JPGStainless Steel Female Paintball Quick Disconnect to 1/8" Male NPT




IMG_2699_small.JPGStainless Steel Male Paintball Quick Disconnect to 1/8" Male NPT $19.





[linked image]Male Paintball Quick Disconnect to 1/8" Female NPT $19.




IMG_4413crop_small.JPGDead Head (No, Not the Jerry Garcia type, the kind you put on the end of a SCUBA tank's hose to determine your remaining tank pressure). Now in Stainless Steel instead of brass $19




[linked image][linked image]

(LEFT) 2.5" Stainless Steel, Glycerin-filled Gauge with PSI & BAR readout and 1/4" NPT $39. Also available for Hill Pumps etc., only $49 Fit other Airtanks, like the Korean, etc. for $69. This gauge is made in America, as is most of my product.

(RIGHT) READ THE PRESSURE OF YOUR SCUBA or SCBA TANK WITH THIS GAUGE. If you would like an accurate gauge, that reads in BAR and PSI to easily measure the pressure inside your airtank, this is it. Just connect the male "Paintball/Foster" type Male Quick Disconnect to your air hose, and that's it! Only $59.




[linked image][linked image] 1" (23mm) High Quality Metal Gauge with BAR readout. Excellent replacement for most air guns, air tanks, etc. These are very nice gauges, not like paintball stuff.

Available in 1/8" BSPP back mount $35




[linked image]

PROBE ADAPTERS




<span class=www.airtanksforsale.com/sseighthfoster_small.jpg " alt="[linked image]"> Dowdy Seal with Stainless Steel 1/8" Female BSPP to Male Quick Disconnect (Fits FX, newer Air Arms, EdGun, etc.)




IMG_1404_small.JPG Steel 1/4" Female BSPP to Stainless Steel Male Quick Disconnect, seals with Delrin insert (Fits Condor/Talon, etc.). Air Force Condor/Talon bottle to Stainless Steel Male Quick Disconnect Adapter. Available as shown as complete adapter to fill an Air Force bottle from either your pump, air tank or any hose that has a Female Quick Disconnect, or I have just the proper male quick disconnects if you already have the Condor Adapter.



[linked image] One Pieces DIN200 to Male Paintball Quick Disconnect (Fits Steyr, Feinwerkbau, etc.) $39








Theoben Rapid Quick Fills

I am advertising 2 kinds of quick fills.

The first is an in-stock quick fill for Theoben Rapids. No longer will you need to unscrew the bottle one turn, burp the action for a few shots, remove the bottle, find then get a wrench for your bottle adapter, fill the bottle, and screw the bottle back on the rifle. Now, with this in-stock fill all you need to do is hook up the female quick disconnect to your hose directly to this male on the rifle. These are great!

Just screw this into the bottom of your Theoben Rapid and then you can just attach the Female Quick Disconnect of your hose directly to your Rapid! In addition, you won’t lose the air it takes to re-pressurize the action when re-installing the bottle. (This picture is outdated. Adapter is now steel, and Male Quick Disconnect is upgraded to Stainless Steel Male, so it won’t wear out. Everything you need, Dowdy Seal, Threaded Fitting and Male Quick Disconnect is included $59




[linked image][linked image]
In addition, I also have the female connector for Allen Z Bottle quick disconnect he mounts on Rapids, Feinwerbau, Stey, etc., as well as the older Air Arms S300, S310, S400, S410 that use the "air chuck" instead of the banjo type (picture below is worth a 1000 words). Only $35




[linked image][linked image]





To receive notifications of the latest Airgun and How-To videos, and discounts and updates on my products, please "Like" my FaceBook page at
https://www.facebook.com/AirTanksForSale


Joe Brancato 714-907-0067

For AirTanks, Custom Hoses, Fittings, Gauges, etc.
please click here http://www.AirTanksForSale.com

[linked image][linked image]

 
 Respond to this message   



BKL MOUNTS - SECOND TO NONE.




James Kitching Memorial Page

D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from buying or selling products posted on this page, as they are the exclusive responsibility of two parties: the person who sold and the person who bought posted items.JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.