Say are there any of you know anyone that maybe have an extra valve that came with the model No.9063 Baby Enders Stove. It came with all the tools but missing the valve or maybe its an extra jet.
Peter
The Baby Enders has a regulator valve, a check valve in the pump assembly, and a relief valve in the fuel cap. Perhaps you could be a bit more specific with regard to exactly which valve you are inquiring about. My Baby came with a spare jet, and spare seals for the fuel cap and pump check valve. Along with a wrench and regulator key.
Enders Stove model No.9063
August 12 2004, 2:21 AM
Thank you Jennifer. If you go to the left side of this site you will see information services. If you click on instructions then click on Enders then it will take you to the models. Click on the model No.9063 and when that opens up go to parts then click on version 2. You will see the key and right below the key it shows a jet I presume (named in german is "Reglerspindel" and another part called Stopbuchse) It is the extra jet that I'm missing and also that "Stopbuchse".
My baby Enders model No.9063 came with the following items:
the wrench,the pricker, the key, and the bakelite funnel. These were all on the inside cover of the stove with the exception of the funnel it was in the box contained area. It also came with the holder to hold your pots etc.
Thanks,
Peter
Jennifer
Stopbuchse
August 12 2004, 3:18 AM
The "stopbuchse" is the graphite packing for the regulator valve spindle. If the stuffing box is not leaking, I would not loose any sleep over not having this part. If it does leak (indicated by a flame at the stuffing box when the stove is operating), and tightening does not resolve the problem, you might try some graphite valve packing material available at many hardware stores. Finding the original part will likely be a challenge.
Enders Stove
August 12 2004, 4:08 AM
You have been great Jennifer, but where do I find that extra jet that came with the stove? Any ideas?
Sincerely a friend,
Peter
regulator valve spindle
August 12 2004, 4:12 AM
Where do I find one of these? I live in Portland, Oregon.
Peter
baark2much
extra jet
August 12 2004, 7:54 AM
Hi,
If your 9063 is missing the jet, and you cannot start the stove, you might want to get in touch with those gents who discuss their 9063s in the thread below (at this moment #6).
They might be merciful and let you have one out of their multiple collection.
I do not believe that there is any supplier at all for Enders.