All information exchanged on this discussion forum is assumed at the readers own risk. S.O.C.I., its officers, directors,
webmasters and members do not endorse its contents and are not liable in any manner for the accuracy, reliability and safety of this information. The admistrators of this site reserve the right to remove any postings at their discrection.
  << Previous Topic | Next Topic >>Return to Index  

Miss my Shay

March 20 2001 at 1:42 PM
  (Login Ronmast)
from IP address 63.14.199.103

Left my Shay back in Utah, for the winter, and Just met a Shay owner down here in Arizona that has his top down. It should get about 85 today. I should say though he was broken down along the side of the road. His shift rod had pulled out of the transmission. and he was waiting for a tow truck. But I turned around to check things out, My wife though I'm crazy to go back about a mile to the first turn around but as I told her that its a Shay down here in Carefree AZ, Next year the Shay is coming to Arizona with me.

 
 Respond to this message   
AuthorReply
bwatson
(no login)
199.207.253.65

Shay problem

March 21 2001, 8:49 AM 

That Shift rod pulling out of the transmission seems to be a pretty common problem. The shift rod, which screws inside a fitting that screws into the tranny, actually vibrates itself loose. I dismantled my shift rod assembly, cleaned and oiled everything, and then put everything back together with "Loctite" on the threads. I haven't had a problems since...... I have an exploded view of the shifter assembly take apart and replacement if anyone needs it.

BW

 
 Respond to this message   

(no login)
67.171.53.175

shay problem

November 10 2006, 10:38 PM 

I would like to get a copy of the shift rod pull out diagram
I have a 1984 Camelot deluxe roadster but I think the trans is pretty much the same as the Shay
Thanks

 
 Respond to this message   

(Login motorpro)
207.200.116.7

shifter tod diagram,how it goes into the 4-speed trans.?

June 28 2009, 10:39 PM 

Just bought a shays, the 4-speed shifter rod seems loose? I read on the forum, that there is a sketch how it is attached.

 
 Respond to this message   

(no login)
24.3.84.209

Miss my Shay

June 30 2009, 4:19 PM 

IF anyone is interested,I still have a few Plastic Bushings left,that take-up the looseness in shifting. dansstreetrods@yahoo.com

 
 Respond to this message   
Current Topic - Miss my Shay
  << Previous Topic | Next Topic >>Return to Index  

Sticky Topic-Using Photobucket to post pictures

Happy Halloween! How will you dress up your Shay for "Trick or Treat"?.
FOR INFORMATION ON UPCOMING SHAY OWNERS CLUB INTERNATIONAL EVENTS PLEASE GO TO: WWW.GEOCITIES.COM/SHAYMODELA