Ford 385 Series Engine Builders Forum: Which carb do you like better Holley, Demon or Edelbrock?

Return to Index

Which carb do you like better Holley, Demon or Edelbrock? November 8 2005 at 9:56 PM No score for this post		Tim (Login kingquad) from IP address 68.219.3.196


Trying to decide which to buy. Would be 950 for a 557.

Scoring disabled. You must be logged in to score posts.

Respond to this message

Responses

Re: Which carb do you like better Holley, Demon or Edelbrock? - chilly460 on Nov 9, 2005, 2:31 PM

Any opinions on - Joe on Nov 9, 2005, 2:34 PM

Re: Any opinions on - chilly460 on Nov 9, 2005, 2:42 PM

Are "out of the box" Holley Dominators (1050 or 1150)...... - DAVID on Nov 9, 2005, 3:07 PM

Re: Are "out of the box" Holley Dominators (1050 or 1150)...... - chilly460 on Nov 9, 2005, 3:14 PM

Out of the box dominator... - Mike_R on Nov 9, 2005, 3:26 PM

Makes sense - DAVID on Nov 11, 2005, 3:59 AM

Carb... - Mike_R on Nov 9, 2005, 3:41 PM

850 Mighty Demon annular - Dave on Nov 9, 2005, 11:45 PM

Anyboby ever try one of the old 3 barrell Holleys? - Tim on Nov 10, 2005, 11:29 PM

Re: Anyboby ever try one of the old 3 barrell Holleys? - Randy Malik on Nov 14, 2005, 11:00 AM

Would you slot a SCJ intake to make it work? - Tim on Dec 5, 2005, 11:28 PM

Carburetors - Steve V on Nov 11, 2005, 7:22 AM

SteveV,Was the 1000 HP carb you had a annular booster carb or>>> - Mark Miller on Nov 12, 2005, 12:25 AM

1000 HP... - Rick S. on Nov 12, 2005, 2:06 AM

Carburetors off the shelf vs built....` - DaveMcLain on Nov 12, 2005, 2:42 AM

I have to agree with Dave McLain... - Danny Cabral on Nov 12, 2005, 3:19 AM

Rick S,What size cam,what stall converter, what gears and>>> - Mark Miller on Nov 13, 2005, 12:49 AM

Re: Rick S,What size cam,what stall converter, what gears and>>> - Rick S. on Nov 13, 2005, 1:45 AM

Edelbrocks aren't that bad if you take the weighted valve out. - Tim on Nov 12, 2005, 9:51 PM

How do you take out that part? - john deana on Nov 18, 2005, 6:20 PM

Just take the top off ... - Tim on Nov 22, 2005, 8:19 PM

OK, I will try it tomorrow - john deana on Nov 22, 2005, 11:49 PM

Yep, it makes a noticeable difference - john deana on Nov 23, 2005, 8:32 PM

You might try adjusting the pump to deliver a little more shot - Tim on Nov 29, 2005, 11:50 PM

I move pump shot arm from middle to top.... - john deana on Dec 4, 2005, 8:12 AM

Clarification - Steve V on Nov 14, 2005, 7:02 AM

Carb stuff - long - sorry - Barry R on Nov 14, 2005, 9:53 AM

Great running Carter, The Thermoquad.... - DaveMcLain on Nov 14, 2005, 2:10 PM

The Rochester Quadrajet is another great carburetor... - Danny Cabral on Nov 14, 2005, 2:59 PM

Another vote for Q-jet - Andy on Nov 14, 2005, 9:03 PM

I have one on my 460 ... - Monstermach on Nov 14, 2005, 10:44 PM

CJ vs SCJ - Ron Vesterby on Nov 30, 2005, 11:48 PM

Attention... Steve V ! - 8liter on Nov 14, 2005, 10:27 PM

8896 - Steve V on Nov 15, 2005, 7:27 AM

Damn...I am glad I wasn't the only one... - Rick S. on Nov 14, 2005, 11:37 PM

Rick S,Thanks for answering my questions,i have a couple more for you. - Mark Miller on Nov 15, 2005, 12:01 AM

Too rich quick fix.... - DaveMcLain on Nov 15, 2005, 9:25 AM

Re: Too rich quick fix.... - 8liter on Nov 19, 2005, 5:08 PM

Re: Rick S,Thanks for answering my questions,i have a couple more for you. - Rick S. on Nov 15, 2005, 11:54 AM

My 1000HP was doing the same thing, - Gregg on Nov 15, 2005, 12:03 PM

Dave,Rick S and Gregg,Thanks for the different suggestions to try.>>>t - Mark Miller on Nov 16, 2005, 12:31 AM

Re: Which carb do you like better Holley, Demon or Edelbrock? - 8liter on Nov 19, 2005, 5:09 PM

This is where to install the wire strand, but I have a question too. - Danny Cabral on Nov 23, 2005, 8:10 PM

More carb questions - Doug on Nov 22, 2005, 9:55 PM

websites - Alan on Nov 23, 2005, 9:48 AM

If.... - Barry R on Nov 23, 2005, 6:50 PM

THX - Doug on Nov 23, 2005, 10:43 PM

Boosters - DaveMcLain on Nov 23, 2005, 11:50 PM