tv repair shop software
 

Software for repair shop
Assist Control


Free trial

 tv repair

 Monitor repair forum - Open   
 Download schematics and service manuals
See our courses below


 		        
  << Previous Topic | Next Topic >>Go to monitor repair course  

viewsonic g790

November 12 2002 at 4:31 PM
No score for this post		   (Login vuemail)
Monitor has power but no raster - H.v is present -
Voltage check as follow : G1= -41vdc , G2= 450v , R,G,B = 65vdc , H= 6.15vdc . There is no brigtness or trace line when I desoldered g1 pin from crt board . Anyone know this problem - Please help .. Thank you

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(Premier Login acrisoft)
Forum Owner

viewsonic g790

No score for this post		November 19 2002, 1:54 PM 


This voltages seems OK
Take a look at our free lesson
It will help you

www.monitor-repair.com

Moses

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
jerald
(no login)

Re: viewsonic g790

No score for this post		October 27 2004, 5:00 AM 

hi, do you have the schematic? can you send me at jeraldmg2004@yahoo.com...

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Anonymous
(no login)

Re: viewsonic g790

No score for this post		January 8 2006, 10:26 AM 

also check here for some answers :
http://www.fixya.com/Product.aspx?prdid=400820

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - viewsonic g790
  << Previous Topic | Next Topic >>Go to monitor repair course  
   TV repair course   TV repair forum     Monitor repair forum    Monitor repair course