tv repair shop software
 

Software for repair shop
Assist Control



Free trial

tv repair

 Monitor repair forum - Open   
Download schematics and service manuals
See our courses below


 
       
  << Previous Topic | Next Topic >>Go to monitor repair course  

TARGA Economy 1785A - problem with HOT

February 21 2005 at 4:10 PM
No score for this post
danyk  (no login)

I got TARGA economy 1785A without HOT. I tried to use
BU2520AF and BU508AF, both worked few minutes, then burned.
2SC3883 didn't burn, but both picture and LED is cyclicaly turning on and off. Are theese not equivalent transistors, or is here wrong something else? And what number was the original HOT?

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Richard B
(no login)

Re: TARGA Economy 1785A - problem with HOT

No score for this post
February 21 2005, 5:30 PM 

Hi BU2520 is too low a current rating and only suitable upto 50kHz line frequency.

The BU508A and 2SC3883 are both TV types and as such suitable for 15kHz in the line scan position.

You need something like BU2527A or 2SC5244A.

Rich

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - TARGA Economy 1785A - problem with HOT
  << Previous Topic | Next Topic >>Go to monitor repair course  
   TV repair course   TV repair forum     Monitor repair forum    Monitor repair course