Somebody dropped a needle in the monitor and shorted some resistors and transistors, I changed the resistors and the transistors, the burned out components where from the pin 28 of the deflection processor to the IRF634b, but the monitor didn’t work after I replaced the components(no high voltage from the FTB).
The problem is that the deflection processor (samsung s1d2511c01). It should command the IRF634b and with a 30-60Khz signal, and I have no signal. The horizontal deflection is also commanded by the processor, and because of this the FTB is not working.
If you have the schematic diagram for the monitor, or any ideas on how to fix it.
|
