This monitor makes faint clicking noise (from the power-supply section) and
led flashes green (in sync with clicks).
After some inspection i found a dead 47uf/250v cap (c617) near the FBT.
I ESR tested caps in the power-supply section, HV section as well as
rectifier diodes. Also, HOT is fine.
I cant detect any short that might overload the psu.
I tried disconnecting leg #1 of the FBT (connected with HOT collector &
yoke) but that didnt change anything.
I currently suspect the psu, although i cant seem to find the problem.
As i'm doing this purely as a hobby & have no schematic for this model,
i'd appreciate any pointers as to what to check next.
Thanks for reading!
Scoring disabled. You must be logged in to score posts.